Bush Hammer Plate with Lavina Traps for Coating Removing
Type:Bush Hammer Plate with Lavina Traps for Coating Removing Fitted to put on different sizes of bush hammer plates. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.
There are several types fit to Scanmaskin machines. The specification of Roller :45*40*12MM*45T Bush hammer tools are tungsten tools which used to remove coating or texture concrete, effectively to make a non-slick profile suitable for both inside and outside environments. they are also used as a design element to create a profile just like Lirchi surface.
Bush Hammered Plate with 3 Heads
This special bush hammered plates with support is very popular in Europe, West Asia and North Africa etc.. Diameter :100mm,125mm, 150mm etc. No.of Rollers: 3, 4, or according to your requirement. Roller Teeth No.:10 points/piece Rollers are made from Tungsten Carbide. Arbor: M14 thread, 5/8"-11 thread and 22,23mm APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.
Trapezoid Bush Hammer for Concrete Floor Grinding Machine
Trapezoid Bush Hammer for Concrete Floor Grinding Machine BUSH-HAMMER is a special tool that can be easily attached to our machines to bush-hammer the floor. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.
This special bush hammered rollers with support is very popular in Europe, West Asia and North Africa. This can be used for bush hammered plates with diameter 100mm,125mm, 150mm etc. Roller Teeth No.:10 pieces Rollers are made from Tungsten Carbide. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.
concrete bush hammer 1.Pin:45 2.Perfect surface fabricating 3.With Support 4. Can sell the roller seperate Application 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.