TRAP Metal Bond Diamond

trapezoids are designed for thin mil coating removal, mastic removal, and for the first steps in polishing. We offer these diamonds in double rounds and single rounds segment design. We offer four bonds soft, medium, and hard. The rounded edges reduce scratches and are excellent for the first steps in polishing or staining applications. Grinding plate fit on Huaqvarna machine or other concrete floor grinders. Grit:16#, 30/40#, 60/80#, 120/150# Segment size:25.4x10mm

New Type Trapezoid Metal PCD for removing concrete coating

New Type Trapezoid Metal PCD for removing concrete coating For removing epoxy coating ,glue Applicaiton: Diamatic Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.  

240mm Diamond Grinding Rings for Klindex Floor Grinder

  240mm Diamond Grinding Rings for Klindex Floor Grinder Grit available:6# 16# 25# 30# 40# 70# 120# # 200# Bond available: Hard bond for soft concrete Medium bond for medium concrete Soft bond for hard concrete Extra soft bond for extra hard concrete Extra hard bond for extra soft concrete             Application: Klindex griner

16grit 10inch Diamond Grinding Plate for Soft concrete

Name:Diameter:10inch 16grit 10inch Diamond Grinding Plate for Soft concrete     Grit available:Coarse/Medium/Fine Equipment:Floor Grinders that take 10" plates

4inch Klindex Marble polsihing puck

  4inch Klindex Marble polsihing puck Size:4inch Grit:50-100-200-400-800-1500-3000# Application: Marble cleaning machine  

9 Seg Metal Diamonds for Concrete Grinding

9 Seg Metal Diamonds for Concrete Grinding These standard quality segments are a great balance between cost and performance. These segment grinding plates achieve maximum square footage at a minimal cost. Whether wet or dry, these grinding plates are effective, efficient and the product of choice. Great balance between cost and performance This grinding plate is effective, efficient and the product of choice The double rectangular segments remove adhesives, coatings and lippage Takes the floor from coarsely structured surface to pre-polish Material Concrete Usage Wet or Dry Grit  6# 16# 30/40# 60/80# 100/120# 150# 200# 300# 400#