Current Position >>> Home >>> Product Navigation >>> Products List >>> Stone Profiler Machines >>> 62
  • Category Description
  • Be sure to check out our full line of affordable to premium router bits for your machine. Financing is available if you qualify-Call 86-592-5099391 for details
  • Stone Profiler Machines
  •  

    Air Grinder (AG 04S) Low Speed Whole Kit

    cliks:1595
    Inquiry number:1

    Air Grinder (AG 04S) Low Speed Whole Kit

    Description: 4"(3") Air Wet Sander / Polisher Kit (Water-Fed Type) CONTENTS 1pc- 4"(3") air wet sander/polisher (Model: Air Grinder (AG 04S) ) 1pc- handle 1pc- 3"backing pad 1pc- 4"backing pad 7pc- 3"diamond sanding disc (50, 100, 200, 400, 800, 1500, 3000 grit) 7pc- 4"diamond sanding disc (50, 100, 200, 400, 800, 1500, 3000 grit) 2pc- water diverter 2pc- open-end wrench 1pc- 1/8"to 1/4"adaptor 2pc- inlet nipple 1pc- oil pot 1pc- Teflon tapec 1pc- blow mold case NOTE Technical data: please refer to our Model Air Grinder (AG 02) Accessories can be optional as per requested

    Pneumatic Grinder for Polishing (AG02)

    cliks:933
    Inquiry number:0

    Pneumatic Grinder for Polishing (AG02)

    Type: Stone Profile Grinder, Wet/Dry Angle Grinder Average Air Consumption: 6 Cfm Maximum Torque: 3"/4" No-Load Speed: 4,500 rpm Air inlet: 1/4'' Air house: 3/8'' Working Pressure: 90psi Weight: 1.37kg Thread: M14 or 5/8-11 Certificate: ISO9001, SGS Delivery time: 7-12 days

    Air Polisher with Rear Exhaust Pipe (AG03)

    cliks:820
    Inquiry number:1

    Air Polisher with Rear Exhaust Pipe (AG03)

    Type: Air Grinder Average Air Maximum Torque: N/A No-Load Speed: 90psi Backing pad size available: 3" and 4" Air inlet: 1/4" Air hose: 3/8" Color: Red Weight: 2kgs No load speed: 4,500rpm Thread: M14 or 5/8''-11 Avg. air consumption: 16cfm Working pressure: 90psi

    Air Angle Grinder for Stone Fabrications

    cliks:622
    Inquiry number:0

    Air Angle Grinder for Stone Fabrications

    Type: Air Angle Grinder for Stone Fabrications Average Air Consumption: 6 Cfm Maximum Torque: 3"/4" No-Load Speed: 4,500 rpm Air inlet: 1/4'' Air house: 3/8'' Working Pressure: 90psi Weight: 1.37kg Thread: M14 or 5/8-11 Certificate: ISO9001, SGS Delivery time: 7-12 days

    7 Inch Pneumatic Grinder for Polishing (AG04)

    cliks:570
    Inquiry number:0

    7 Inch Pneumatic Grinder for Polishing (AG04)

    Type: Stone Profile Grinder, Wet/Dry Angle Grinder Average Air Consumption: 6 Cfm Maximum Torque: 3"/4" No-Load Speed: 4,500 rpm Air inlet: 1/4'' Air house: 3/8'' Working Pressure: 90psi Weight: 1.37kg Thread: M14 or 5/8-11 Certificate: ISO9001, SGS Delivery time: 7-12 days

    Steam Cleaner

    cliks:1798
    Inquiry number:1

    Steam Cleaner

    Model # JNX3000 Steam Pressure 12 ~ 6bar/1.2 ~ 0.6mpa Steam temperature 60 degrees- 110 degrees Preheating time 1-2 min Power 3KW Voltage 220V 50/60Hz Weight 25kg Dimension 40*50*48cm Feature Strong steam pressure, single gun, without boiler. Water consumption  9 L/H Water tank 8 L   * JNX-3000 is the most powerful 3KW steamer in the world. * The steam pressure of JNX-3000 is not steady. It is from 12bar to 6 bar about 20-30 seconds. Then keep on 6bar. Stop the steam gun, its steam pressure rise. It takes about 30seconds to 1 min to be 12bar again. In this way, it can provide more pressure for home use, hotel, restaurant, hospital, office building, etc.

     

  • 1 2 3