Parts of Bush Hammer Rollers,Tungsten Carbide Roller Parts

It can be used for bush hammered plates with diameter 100mm,125mm, 150mm etc. Roller Teeth No.:312 pieces with 6 rows Roller thickness:12mm Inside diameter:8mm Outside diameter:32mm Rollers are made from Tungsten Carbide.  

Bush Hammering Rollers For Removal

  Bush-hammering roller is a special tool that suited on plate to bush-hammer the floor. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.   Inner hole: 12mm   Outer hole:45mm   Grain No. : 45

Bush Hammered Plate with 3 Heads

This special bush hammered plates with support is very popular in Europe, West Asia and North Africa etc.. Diameter :100mm,125mm, 150mm etc. No.of Rollers: 3, 4, or according to your requirement. Roller Teeth No.:10 points/piece Rollers are made from Tungsten Carbide. Arbor: M14 thread, 5/8"-11 thread and 22,23mm APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.

Special Bush Hammered Rollers

This special bush hammered rollers with support is very popular in Europe, West Asia and North Africa. This can be used for bush hammered plates with diameter 100mm,125mm, 150mm etc. Roller Teeth No.:10 pieces Rollers are made from Tungsten Carbide. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.

concrete bush hammer

concrete bush hammer 1.Pin:45 2.Perfect surface fabricating 3.With Support 4. Can sell the roller seperate   Application 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.