125mm Bush Hammer Plate With Three Rollers (M14)

Bush hammered plate Bush hammered roller is suitable for surface fabricating, making bush hammered effects for stone products. it's scrollable and highly effcient, for example, a roller of 200mm's diameter can fabricating more than 100m2 stone products per day. We can sell the roller separately, and we have plenty of styles and specifications for the roller starts form 125mm to 700mm.and the pings of roller can be customized aswell. Size:125mm Thread:M14 Delivery Time：7-12 days BUSH HAMMER PLATES SPECIFICATION Outer diameter NO.of rollers 5"(125mm) 3 6"(150mm) 3 8"(200mm) 6 10"(250mm) 8 12"(300mm) 9 14"(350mm) 12 16"(400mm) 15 18"(450mm) 18  

Parts of Bush Hammer Rollers,Tungsten Carbide Roller Parts

It can be used for bush hammered plates with diameter 100mm,125mm, 150mm etc. Roller Teeth No.:312 pieces with 6 rows Roller thickness:12mm Inside diameter:8mm Outside diameter:32mm Rollers are made from Tungsten Carbide.  

Cemented Carbide45 Grains Bush Hammer Roller without Support

 Outside diameter: 45mm Inside diameter:12mm Grains No.:45 grains or 30 grains     Fitted to put on different sizes of bush hammer plates.   APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.

125mm 2 Pins Bush Hammer Plate with 3 Rollers on Werkmaster Machine

 We design this new type of bush hammer plate to fitt on Werkmaster grinding machine. Diameter:125mm  Connection Type: 2 Pins Roller No.: 3 rollers Grains of each roller:30 grains APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.

7 Inch 180mm Bush Hammer Roller Plate for Hand Grinder

7 Inch 180mm Bush Hammer Roller Plate for Hand Grinder   Grains No.:30 grains  Used for 7'' hand grinder .   APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.

Bush Hammering Rollers For Removal

  Bush-hammering roller is a special tool that suited on plate to bush-hammer the floor. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.   Inner hole: 12mm   Outer hole:45mm   Grain No. : 45