Continuous Rim Grinding Cup Wheel DGW09

Cup Wheel designed for fast rough dry or water-cooling grinding  and shaping of marble and granite surfaces, cormers, edges and angles,comes in aluminum base and steel base. The former provide light weght and fast cooling effect by high comductivty. The latter provide aggressive grinding with long lifesspan. This tool's features: 1.100mm*Coarse*M14 thread 2.Continuous rim 3.Medium bond(Soft,Medium,Hard bond is available upon your requirement) 4.Excellent for stone surface grinding,especially for concretes 5.Applied on most angle grinder or floor grinding machines

7 Inch Grinding Cup Wheel with 6 Arrow Segments

 The Arrow Cup Wheel is designed for aggressive grinding. The placement and orientation of the segments are designed for high stock removal.     High stock removal / Maximum tool life Size:7 inch  Grit:Coarse, medium and fine or 16#-200# for your choice. Bonds: Soft, medium and hard   6 arrow segments / 10mm segment height   Use for DRY grinding  Available in 7/8" - 5/8" arbor Other connection: M14 thread, 5/8"-11 thread  

Z segment 7 Inch Diamond Grinding Cup Wheels for Concrete

The Z-Seg Cup Wheel is used for thin coating removal and surface preparation. The "Z" segment design provides each segment with more surface area contact and allows the operator more control with less opportunity to dig into the floor. The Z-Seg provides flexibility over a wide range of surfaces without sacrificing tool life.   Grit: coarse, medium, fine Bond: soft, medium, hard     Use for concrete grinding Available Connection: either 5/8” – 7/8” arbor M14 thread 5/8''-11 thread  

PCD SEGMENTED CUP WHEELS

Segment PCD cupwheels are the best tool for removal of heavy epoxy, coatings, mastic, glues or even fast stock removal of concrete. Manufactured from the highest quality polycrystalline diamonds. This tools scraping action eliminates gumming up of segments and maximizes production. 4.5" x 9(seg) x 1/4 PCD cup wheel with 7/8"- 5/8" not available with wear dots 5" x 9(seg) x 1/4 PCD cup wheel with 7/8"- 5/8" available with or without wear dots 7" x 9(seg) x 1/4 PCD cup wheel with 7/8"- 5/8" available with or without wear dots

Ceramic Bond Diamond Edge Grinding Cup Wheels

For stock removal of concrete and mastics, rubbers, epoxies and other coatings   Grit: 30-400#

4 Inch Diamond Grinding Cup Wheels with 9 PCD

Segment PCD cup wheels are the best tool for removal of heavy epoxy, coatings, mastic, glues or even fast stock removal of concrete. Manufactured from the highest quality polycrystalline diamonds. This tools scraping action eliminates gumming up of segments and maximizes production. 4'' x 9 PCD cup wheel with 7/8"- 5/8" 4.5" x 12 PCD cup wheel with 7/8"- 5/8" 5" x 12 PCD cup wheel with 7/8"- 5/8" 7" x 12 PCD cup wheel with 7/8"- 5/8"