E30 Bevel Shape Router Bits Pos 0 Segmented

Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

E30 Bevelled Shape Router Bits Pos 4 Resin Abrasive

Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

E30 Bevelled Shape Router Bits Pos 7 Resin Abrasive

Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

E30 Bevelled Shape Router Bits Pos 3 Sintered Continuous

Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

E30 Bevelled Shape Router Bits Pos 6 Resin Abrasive

Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

E30 Bevelled Shape Router Bits Pos 2 Sintered Continuous

Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.