Current Position >>> Home >>> Product Navigation >>> Products List >>> Router Bits >>> 3
  • Category Description
  • Router Bits for Granite, Marble, Porcelain, Concrete, and more.
  • Router Bits
  •  

    Diamond Segmented Router Bits for Granite Countertops

    cliks:1487
    Inquiry number:0

    Diamond Segmented Router Bits for Granite Countertops

    Diamond Segmented Router Bits for Granite Countertops This Segmented router bit is position 0#. It is a very aggressive profile tool for doing different shapes of edge details on granite and other natural stones. This diamond router bit is equipped with 2 connecting bolts, 8mm and 10mm to fit Master, Sector and other profiling machines. Since they are segmented diamond tooling, they will give agressive cuts with a speedy material removal rate. This position 0# tool will sharp grind and will completely define the shape. It is designed for long life and works on all granites. You can use this bit followed by a coarse diamond polishing pad (such as a 200 or 400 grit) to shorten your completion time as you will have to spend much less time polishing the edge to match the factory finish. When you purchase the Diamante Italia Brand you are buying the best available quality! This unit is half the price of other products that aren't nearly this high a quality tool.   Excellent on granite and other natural stone Provides an agressive cut and smooth finishes Fast removal rate Long life Perfect for commercial and industrial applications

    E30 Bevelled Shape Router Bits Pos 2 Sintered Continuous

    cliks:1357
    Inquiry number:0

    E30 Bevelled Shape Router Bits Pos 2 Sintered Continuous

    Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

    E30 Bevelled Shape Router Bits Pos 7 Resin Abrasive

    cliks:1353
    Inquiry number:0

    E30 Bevelled Shape Router Bits Pos 7 Resin Abrasive

    Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

    F30 Ogee Shape Router Bits Pos 0 Segmented

    cliks:1352
    Inquiry number:1

    F30 Ogee Shape Router Bits Pos 0 Segmented

    Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

    E30 Bevelled Shape Router Bits Pos 6 Resin Abrasive

    cliks:1351
    Inquiry number:0

    E30 Bevelled Shape Router Bits Pos 6 Resin Abrasive

    Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

    E30 Bevelled Shape Router Bits Pos 3 Sintered Continuous

    cliks:1343
    Inquiry number:0

    E30 Bevelled Shape Router Bits Pos 3 Sintered Continuous

    Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

     

  • 1 2 3 4