E30 Bevelled Shape Router Bits Pos 2 Sintered Continuous

Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

E30 Bevelled Shape Router Bits Pos 7 Resin Abrasive

Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

E30 Bevelled Shape Router Bits Pos 6 Resin Abrasive

Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

E30 Bevelled Shape Router Bits Pos 3 Sintered Continuous

Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

E30 Bevelled Shape Router Bits Pos 4 Resin Abrasive

Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

Diamond Dry Polishing Drum Wheels

Diamond Dry Polishing Drum Wheels   Polishing Drum Wheel is designed for stock removal on granite and hard stone grinding away excess stone to prepare for polishing. Drum Wheel is used for polishing stone side after finishing Zero Tolerance Wheel . Rubber drum wheels are flexible. So they have good joint with the stone. The bond of Zero Tolerance Wheel is metal and bond of Drum Wheel is resin. Delivery Time：7-12 days Features: These resin drum wheel are prefect for working with granite or marble ,especially on kitchens.sink cutouts could be easily finished with these .