Electroplate Hand Polishing Pads

Electroplate Hand Polishing Pads Use On Glass, Ceramics, Marble, Granite, Concrete, Terrazzo and Quartz Surfaces Available in Electroplated and Resin Grits Grits Range From #60 to #3000 Size: 90*55mm  

100mm Thin Aluminum Backer Pads

100mm Thin Aluminum Backer Pads Size: 4 inch Arbor: 5/8"-11 Max Ratation: 13,0000rpm With flexible support for PSA backed sand paper A backer pad for engaging and supporting abrasive sheets, the backer pad being mounted securely to a drive shaft to prevent relative rotation thereto, and to allow easy mounting and dismounting of the backer pad to the mounting shaft without the use of tools. It is for contours edges and surfaces, for straight edges and surfaces.  

Speed Squeegee

Mainly used for industrial coating, paint application, wall treatment, and floor construction. Classified by thickness (WFT MILS) and applicable scenarios: 5-7 WFT MILS (Yellow Label): Suitable for high flow rates and rapid application, such as large-area primers or putty layers; suitable for quick coverage and initial coating. 8-12 WFT MILS (Red Label): Suitable for medium-thickness coatings, such as wall leveling and intermediate coating application, balancing efficiency and smoothness. 15-20 WFT MILS (Green Label): Suitable for fine coatings and high smoothness requirements, such as artistic paints and epoxy flooring. 25-30 WFT MILS (Blue Label): Suitable for thick-film coatings, rust-preventive paints, and heavy-duty anti-corrosion coatings; suitable for industrial equipment or bridge coating. 40-45 WFT MILS (Orange Label): Suitable for ultra-thick coatings, wear-resistant flooring, and waterproof layers, such as basement floors and factory floors. 50-60 WFT MILS (Purple Label): For extremely thick coatings, repairs, or special protective layers, such as concrete repairs and anti-slip coatings. Classified by Hardness: FLAT FLEXIBLE: Suitable for curved and uneven surfaces, such as curved walls and pipe coatings; can adhere to complex contours. FLAT STIFF: Suitable for flat surfaces, high-efficiency squeegeeing, such as cement floors and metal sheets, ensuring a uniform coating. Summary: These squeegees are professional application tools widely used in construction, industry, flooring, corrosion protection, and decoration. The appropriate model should be selected based on the coating thickness, surface condition, and application requirements.  

White Colors Rubber Backer Pads

White Colors Rubber Backer Pads Rubber based Diameter: 100mm Arbor: M14. 5/8"-11 For velcro polishing pads It is easy for change and convenient attachment With flexible support for PSA backed sand paper  

3Inch New Type Ceramics Puck

3Inch New Type Ceramics Puck Size: 80mm/3 inch Used: dry Grit: 30-50-100-200# Ceramic tools make the tricky transition between metal diamond tools and resin tools simple.In some cases,our ceramic tools can be used as the inital cut, eliminating the use of metal bond tooling saving material costs on the job. Economical and versatile  

Regular arrange cutting blades

Regular arrange cutting blades Size: 115-125-150-180-230mm Arbor: 22.23mm Designed for cutting and shaping Granite, Marble, Quartz, Reinforced Concrete, Bricks Hard Clay Roof tiles and General Masonry products. The diamond segment extends into the face of the blade to enable shaping of the work piece. This allows the blade to continue cutting and reduces the likelihood of snagging.