Diamond Cut & Grind Flush Cut/Grinding Blades
The Cut & Grind cuts like a traditional diamond blade and grinds like a cup wheel. Designed for use on angle grinders, it can be used for straight cutting, flush cutting, grinding, edge grinding and shaping a variety of building materials including stone, marble, tile and granite. Shown with 5/8"-11 and M14 adapter which is included with blade. Available Size: 4''/100mm 4.5''/115mm 5''/125mm 6''/150mm 7''/180mm 9''/230mm
The small cutting blade is for general use in various stones. Designed for use on angle grinders, it can be used for straight cutting, flush cutting, grinding, edge grinding and shaping a variety of building materials including stone, marble, tile and granite. Shown with 5/8"-11 and M14 adapter which is included with blade. Available Size: 4''/100mm 4.5''/115mm 5''/125mm 6''/150mm 7''/180mm 9''/230mm
Vacuum Brazed Diamond Grinding Pad
The vacuum brazed diamond grinding pads combine the aggressiveness of vacuum brazed diamond cup wheels and smoothness of diamond polishing pads. Attached to a semi rigid back holder, rubber backer absorbs the noise and vibration created by steel based diamond cup wheels to give fabricators the smoothest feel, while aggressively shapes and removes material. They are ideal for creating small radius by hand, smooth out cuts, and removes materials where necessary. Many fabricators use it to replace the heavy grinding stones. They last many times longer than grinding stones and reduce fatigue. Use it before you use the diamond polishing pads. 30 grit is more aggressive for granite, marble, glass, and other stones, even concrete Velcro backed for quick and easy change with back holders Optimal speed around 4000-5000 RPM; Wet use preferred to extend life.
Segment PCD cupwheels are the best tool for removal of heavy epoxy, coatings, mastic, glues or even fast stock removal of concrete. Manufactured from the highest quality polycrystalline diamonds. This tools scraping action eliminates gumming up of segments and maximizes production. 4.5" x 9(seg) x 1/4 PCD cup wheel with 7/8"- 5/8" not available with wear dots 5" x 9(seg) x 1/4 PCD cup wheel with 7/8"- 5/8" available with or without wear dots 7" x 9(seg) x 1/4 PCD cup wheel with 7/8"- 5/8" available with or without wear dots
3 Inch Diamond Typhoon Type Resin Floor Polishing Pads for Terrazzo
3 Inch Diamond Typhoon Type Resin Floor Polishing Pads for Terrazzo 1. Extra thick segments designed for long product life. 2. 10 mm thick diamond discs are the thickest on the market. 3. Female velcro back - attaches to any male velcro face. 4. Typhoon diamond resin discs are manufactured with high segments for long life and also have a uniquely designed waterway channel for swarf removal. 5. Excellent for surface polishing and floor restoration of marble, terrazzo, travertine. Typhoon Diamond Discs are a high quality long lasting resin bond diamond polishing disc used to restore and polish a variety of stone floor surfaces. The Typhoon Discs may be used under a variety of floor machines, including single disc floor machines, hand held polishers as well as multiple head machines like the Cimex. The Typhoon diamond pads perform well on a variety of hard surfaces including Marble, Terrazzo, Limestone, Travertine, leaving a flat, highly polished surface. 1. Typhoon Diamonds use the latest technology - Our most popular diamond disc. 2. Average life of the Typhoon diamond discs ranges from 3,000-5,000 sq ft. depending on floor condition, density (hardness of the stone) and lippage (unevenness of the tile). 3. Wider range of operating RPM's from 150 to 3500. 4. Higher quality diamonds with multiple edges are used. 5. Up to 3 times more diamonds per pad than competitors discs. 6. The longest lasting resin bond diamonds you can buy. Diamond discs are available in the following grits: 50#-100#-200#-400#-800#-1500#-3000#
Terrco Diamond Grinding Polishing Plug for flooring
Terrco Diamond Grinding Polishing Plug for flooring This arrow shape segment metal grinding disc is used for aggressive removal applications. The wide gaps between segments offer more of a cutting edge and will not load or gum up as much. The arrow shape is perfect for all coatings such as epoxy, urethane paint, mastic and other similar coatings. Available in: 400 grit 300 grit 200 grit 150 grit 120 grit 70 grit 50 grit 30 grit 16 grit 6 grit Available bond: soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability.