4 Inch 100mm Diamond Wet Polishing Pads

Product name: 4 Inch 100mm Diamond Wet Polishing Pads    For polishing fuscous and light granite. Not stain on the stone surface.  Grit: 50#, 100#, 200#, 400#, 800#, 1500#, 3000#, Buff  Diameter: 4"  Features:  A) High gloss finishes in very short time  B) Never mark the stone and never burns the surface of the stone to change the natural color  C) Bright clear light and never fade  D) Suitable for the grinding process of the curved or polygon surface  Operation speed: 600-1200rpm   Delivery Time：7-12 days For more details, pls contact us, we warmly welcome you to negotiate and cooperate with us.

4inch new type Klindex resin polishing puck

4inch new type Klindex resin polishing puck Size available in 4inch Grits come in 50-100-200-400-800-1500-3000# Application:Klindex Floor polisher

Double PCD Double Bar Diamond Segment for Terrco

Double PCD Double Bar Diamond Segment for Terrco For removing epoxy coating ,glue Applicaiton: Floor Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

Color one Resin polishing puck with 10mm thickness

Color one Resin polishing puck with 10mm thickness Size available in 3inch Grits come in 50-100-200-400-800-1500-3000# Application:Floor polisher

4inch resin polishing puck for concrete floor

4inch resin polishing puck for concrete floor Size available in 4inch Grits come in 50-100-200-400-800-1500-3000# Application:Floor polisher  

Quick change diamond pcd for Edco Grinder

Quick change diamond for Edco Grinder For removing epoxy coating ,glue Applicaiton: Floor Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.