Hybrid Type Resin Floor Polishing Pads (DMY36A)

The Pregnant Diamond Metal-Chip Polishing Pads, flexible or rigid, one of our patent pending products, a serial of high capability pads, Grit 50#--3000# Size:3'',4'' Can be used by wet or by dry. They can be applied to excellent fabrication of marble, concrete and granite. They are perfect at polishing concrete floor by dry. Everyone who has used them likes the combination of aggressive and long lasting performance. (See the Product Number Below) HAL Hardest Epoxy Dry Use Floor Pads. This is a serial of High gloss dry pads. The HAL dry pads with high diamond concentration, hardest epoxy with aluminum oxide filler are perfect for the floor of concrete and terrazzo.

7 Inch Arrow Segment Cup Wheels

The Arrow Cup Wheel is designed for aggressive grinding. The placement and orientation of the segments are designed for high stock removal.   High stock removal / Maximum tool life 30/40 grit / 12 segments / 10mm segment height Use for DRY grinding  Available in 7/8" - 5/8" arbor

7 Inch T Segment Red Cup Wheel

The T-Seg Cup Wheel is used for thin coating removal and surface preparation. The "T" segment design provides each segment with more surface area contact and allows the operator more control with less opportunity to dig into the floor. The T-Seg provides flexibility over a wide range of surfaces without sacrificing tool life. 30/40 Grit / 12 segments / 5mm segment height Use for dry grinding Available in either 5/8” – 7/8” arbor

4inch Antiquing Abrasive Brush for Grinding AB02

1) Type of brush: Frankfurt, Fickert, and Round 2) Grit: 36, 46, 60, 80, 120, 180, 240, 320, 500 3) Adopt the diamond-impregnated filament  4) For polishing the surface into leather-look or antique-look on the granite or marble slab     Advantages: These abrasive brushes are adopting the diamond-impregnated filament. The are polishing the surface into leather-look or antique-look on the granite or marble slab with good working result and long lifespan.

Copper and Resin Bond Polishing Pads_Sunflower Pad SDM_01

The Sunflower Pads are a combination of copper and resin bond designed for polishing straight edges.Applied on hand angle grinders to achieve a higher gloss.The copper bond is a soft metal that will remove scratches better than a metal bond,allowing the resin bond to polish to the highest luster.   4'' diameter available currently.   Grit No: 50#,100#,200#,400#,800#,1500#,3000#   Delivery time:7-12days depands on the order quantity

8 Inch Magnetic Floor Grinding Plate (No Hole)

This 8 Inch Magnetic Floor Grinding Plate has no hole .customers can drill themselves. Suit 5 grinding shoes. Can make according to customers requirement , normally 8 inch and 10 inch.