Bush Hammered Plate with 3 Heads

This special bush hammered plates with support is very popular in Europe, West Asia and North Africa etc.. Diameter :100mm,125mm, 150mm etc. No.of Rollers: 3, 4, or according to your requirement. Roller Teeth No.:10 points/piece Rollers are made from Tungsten Carbide. Arbor: M14 thread, 5/8"-11 thread and 22,23mm APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.

Continuous Rim Grinding Cup Wheel DGW09

Cup Wheel designed for fast rough dry or water-cooling grinding  and shaping of marble and granite surfaces, cormers, edges and angles,comes in aluminum base and steel base. The former provide light weght and fast cooling effect by high comductivty. The latter provide aggressive grinding with long lifesspan. This tool's features: 1.100mm*Coarse*M14 thread 2.Continuous rim 3.Medium bond(Soft,Medium,Hard bond is available upon your requirement) 4.Excellent for stone surface grinding,especially for concretes 5.Applied on most angle grinder or floor grinding machines

Brazed Diamond Router Bit(B15 B20 B30)

 Applying the latest technology, we offer brazed router bits that provide most aggressive performance and highest efficiency. Brazed diamond router bits can increase your productivity by as much as 100% as compared to those of metal bond router bits. The brazed router bits will keep their true shapes during their entire lives. If used properly and are taken good care of, the bits will last as long as some best quality metal bond bits. Their prices are much more affordable than those of metal bond bits. Diameter:85mm Type:B15, B20, B30 Connection type: M14 Thread.

Special Bush Hammered Rollers

This special bush hammered rollers with support is very popular in Europe, West Asia and North Africa. This can be used for bush hammered plates with diameter 100mm,125mm, 150mm etc. Roller Teeth No.:10 pieces Rollers are made from Tungsten Carbide. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.

7 Inch Grinding Cup Wheel with 6 Arrow Segments

 The Arrow Cup Wheel is designed for aggressive grinding. The placement and orientation of the segments are designed for high stock removal.   High stock removal / Maximum tool life Size:7 inch  6 arrow segments / 10mm segment height Use for DRY grinding  Available in 7/8" - 5/8" arbor

5 Dot HTC Resin For HTC Quick Change Plate

Grit:50-3000# Use dry Specifically for polishing after metal.