XRC High Performance Resin Polishing Rings (DMY27)

This kind of polishing rings are designed to polish edges on concrete floors after they have been grinded and honed with the 3N Copper Rings. This special bond will produce a high gloss shine on concrete. For dry applications only! Size:7'' Grit:50-3000#  

Calibra Ceramic 3" Floor Pads (DMY29)

 Calibra grinding discs are designed for the removal of difficult scratches which are sometimes left behind by the metal bond grinding steps. They are also useful for floor restoration, and can be used wet or dry. An essential tool for any operator who will be grinding, Calibra save valuable time by eliminating the need for multiple passes with metal plates. These discs are best for hard concrete applications as the life of Calibra is shorter when used on soft floors. Size:3''

4 Inch Dot Type Metal Floor Polishing Pads (DMY32)

This kind of metal floor polishing pads are used on floor grinding machine. After concrete preparation , use  this kind of pads to first gringing surface ,left a smooth track. Size:4'' Dot No.: 4 Grit: 6-400#  

Metal Bond Grinding Pads For Concrete (DMY37)

This kind of concrete metal pad is used for first grinding of concrete after Surface preparation, for floor grinding machine. Size:4'' Grit:6-400# Velcro back. Segment No.: 12

Air Grinder (AG 02)

Description: 4"(3") Air Wet Sander / Polisher (Water-Fed Type) The Water-Feed installation favors your marble and stone finish work by water flow on the working area and does no harm to your body due to non-dust atmosphere at operation Auxiliary handle can be mounted onto either side of tool body Features side mounted air regulating knob and water flow control valve This low speed tool does the sanding and polishing work by fitting sanding disc wet 4?3?in different grit from corse to fine Great for laminating marble or stone table and trim work Side exhaust Parameter: FREE SPEED rpm SPINDLE SIZE BACKING PAD in. mm AIR INLET (PT) AIR HOSE (ID) AVG.AIR CONSUMPTION SCFM WORKING PRESSURE Psi Kg(Bar) LENGTH x HEIGHT WEIGHT Kgs/Lbs 4,500 rpm 5/8-11UNC or M14x2 4" 100 1/4" 1/4" 6 90 6.3 9.72"x3.86" 247x98 1.32/2.91

Air Grinder (AG 01) Low Speed

Description: 4"(5")Air Wet Sander / Polisher Kit (Water-Fed Type) CONTENTS 1pc- 4"(3") air wet sander/polisher (Model: Air Grinder (AG 01) ) 1pc- handle 1pc- 3"backing pad 1pc- 4"backing pad 7pc- 3"diamond sanding disc (50, 100, 200, 400, 800, 1500, 3000 grit) 7pc- 4"diamond sanding disc (50, 100, 200, 400, 800, 1500, 3000 grit) 2pc- water diverter 1pc- air tube 1pc- tube clamp (21x38) 2pc- open-end wrench 1pc- 1/8"to 1/4"adaptor 2pc- inlet nipple 1pc- oil pot 1pc- Teflon tape 1pc- blow mold case NOTE Technical data: please refer to our Model Air Grinder (AG 01) Accessories can be optional as per requested