Diamond Core Drill Bit(Blue)

Specifications:   1.Segment:Crown ring(dia14-dia50) and segmented(dia60-dia152). 2.Center water fed. 3.Total length:50mm,80mm,100mm,120mm,360mm. 4.Connection:Shank,M14,M16,5/8''-11,GAS1/2'' for CNC machine.   Feature   1.Fast and Smooth cutting 2.Long lifetime 3.Less Chipping 4.Minimizing any breakage  5.Center water feed,used wet. 6.Less loss of material 7.Minimum material deformation 8.Less heat generation  9.Better finish quality    Machinery Core Drill Bits be used for protable electric driller and bench drilling machine.    Application granite, concrete and marble.   Delivery Delivery Time:Normal 7-12 days .Special order depends.

PCD Grinding Segments

trapezoids are designed for thin mil coating removal, mastic removal, and for the first steps in polishing. We offer these diamonds in one bar and two PCDs We offer three bonds: soft, medium, and hard. Grinding plate fit on a lot of floor grinders. Grit:16#, 30/40#, 60/80#, 120/150# Bar size: 40x10x3mm

HTC Floor Grinding Diamonds

HTC floor grinding diamonds are designed for thin mil coating removal, mastic removal, and for the first steps in polishing. We offer these diamonds in vary segment style: three fans, double bars, single bar, rounds or arrow segments etc.    We offer three bonds soft, medium, and hard.   Grinding plate fit on HTC machine   Grit:16#, 30/40#, 60/80#, 120/150#

Diamond Tooling For HTC Floor Grinder

HTC floor grinding diamonds are designed for thin mil coating removal, mastic removal, and for the first steps in polishing. We offer these diamonds in vary segment style: three fans, double bars, single bar, rounds or arrow segments etc.    We offer three bonds soft, medium, and hard.   Grinding plate fit on HTC machine   Grit:16#, 30/40#, 60/80#, 120/150#

PCD Grinding Plug

This kind of PCD Grinding Plugs are desinged for  remove adhesives, coatings and lippage, taking the floor from coarsely structured surface to prepolishing. Available in Standard and Premium quality Levels and aggressively removes stock Longlasting and resistant to high temperatures Available in soft, medium and hard bond for all different Grit

Wet core bit (32mm)

Application: granite and marble. Segment: crown ring (dia14-dia50) and segmented (dia60-dia152). Wet use, center water feed. Total length: 50mm, 80mm, 100mm, 120mm, 360mm. Connection: shank, M14, M16, 5/8＂-11, GAS1/2＂for CNC machine. Advantage: fast and smooth cutting, long lifetime.   Specification: D(inch) D(mm) D(inch) D(mm) 3/16＂ 5mm 1-5/8＂ 42mm 1/4＂ 6mm 1-3/4＂ 45mm 5/16＂ 8mm 2＂ 50mm 3/8＂ 10mm 2-3/8＂ 60mm 1/2＂ 12mm 2-1/2＂ 63mm 5/8＂ 16mm 3＂ 76mm 3/4＂ 20mm 3-1/2＂ 89mm 1＂ 25mm 4＂ 102mm 1-3/6＂ 30mm 4-1/2＂ 115mm 1-1/4＂ 32mm 5＂ 127mm 1-3/8＂ 35mm 6＂ 152mm 1-1/2＂ 38mm