5 Step Shine Dry Polishing Pads For Stone and Concrete Polishing （5SP_01）

 This Kind of Dry Polishing Pads are designed for stone and concrete polishing. Used on hand polisher / sander. Size:3'', 4'',5''.

Bush Hammering Plate For Klindex System

  BUSH-HAMMER is a special tool that can be easily attached to Klindex  machines to bush-hammer the floor. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.   Size:16''

Bush Hammering Rollers For Removal

  Bush-hammering roller is a special tool that suited on plate to bush-hammer the floor. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.   Inner hole: 12mm   Outer hole:45mm   Grain No. : 45

Bush Hammering Rollers With Support

 This kind of bush hammering rollers with support is very popular in Australia and USA. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing. Inner hole: 12mm   Outer hole:45mm   Grain No. : 45

Vacuum Brazed Drill Bits

Application: granite, marble. Arbor: 3/8＂ or 1/4＂ shank, M14 thread. Fast cutting action, vacuum brazed for long life. Item No. Diameter electroplated Vacuum brazed   EAB5 VB5 3/16＂/5mm EAB6 VB6 1/4＂/6mm EAB10 VB10 3/8＂/10mm Can be made according to drawings and samples.

Diamond Core Bit(Black)

Specifications:   1.Segment:Crown ring(dia14-dia50) and segmented(dia60-dia152). 2.Center water fed. 3.Total length:50mm,80mm,100mm,120mm,360mm. 4.Connection:Shank,M14,M16,5/8''-11,GAS1/2'' for CNC machine.   Feature   1.Fast and Smooth cutting 2.Long lifetime 3.Less Chipping 4.Minimizing any breakage  5.Center water feed,used wet. 6.Less loss of material 7.Minimum material deformation 8.Less heat generation  9.Better finish quality    Machinery Core Drill Bits be used for protable electric driller and bench drilling machine.    Application granite, concrete and marble.   Delivery Delivery Time:Normal 7-12 days .Special order depends.