E30 Bevelled Shape Router Bits Pos 6 Resin Abrasive
Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.
E30 Bevelled Shape Router Bits Pos 7 Resin Abrasive
Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.
5 Step Dry Polishing Pads For Stone and Concrete Polishing (5SP_01)
This Kind of Dry Polishing Pads are designed for stone and concrete polishing. Used on hand polisher / sander. Size:3'', 4'',5''.
5 Step Shine Dry Polishing Pads For Stone and Concrete Polishing (5SP_01)
This Kind of Dry Polishing Pads are designed for stone and concrete polishing. Used on hand polisher / sander. Size:3'', 4'',5''.
Bush Hammering Plate For Klindex System
BUSH-HAMMER is a special tool that can be easily attached to Klindex machines to bush-hammer the floor. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing. Size:16''
Bush Hammering Rollers For Removal
Bush-hammering roller is a special tool that suited on plate to bush-hammer the floor. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing. Inner hole: 12mm Outer hole:45mm Grain No. : 45