200mm Klindex Metal Bond Grinding Disc with 3 Pins

 Metal Bond Grinding Disc with 3 Pins are designed for grinding concrete,granite, terrazzo and travertine etc. and for the first steps in grinding.   Size:8"/200mm diameter, with 3 pins.   There are 6 pieces segments on the metal body.   Segment size:40mm*12mm*12mm   Grit:16#-400#    We offer three bonds soft, medium, and hard; and also make very soft, very hard bond.   Fitted to Klindex floor machine.  

Cemented Carbide45 Grains Bush Hammer Roller without Support

 Outside diameter: 45mm Inside diameter:12mm Grains No.:45 grains or 30 grains     Fitted to put on different sizes of bush hammer plates.   APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.

240mm Klindex Metal Bond Diamond Grinding Ring with 3 Pins

 Metal Bond Diamond Grinding Ring with 3 Pins are designed for grinding concrete,granite, terrazzo and travertine etc. and for the first steps in grinding.   Size:240mm diameter, with 3 pins.   There are 16 pieces segments on the metal body.   Segment size:4mm height   Grit:16#-400#    We offer three bonds soft, medium, and hard; and also make very soft, very hard bond.   Fitted to Klindex floor machine.

100mm 7 Segs Klindex Metal Grinding Diamond With 3 Holes

 Metal Bond Diamond with 3 holes are designed for thin mil coating removal, mastic removal,  and for the first steps in polishing.   There are 7 pieces segments on the metal body. We make the thicker segments as our clients' need to fit to grinding concrete, marble, granite etc. floors.   Segment thickness:12mm   Size:4"/100mm diameter, with 3 holes.   Grit:16#-400#    We offer three bonds soft, medium, and hard.   Fitted to Klindex floor machine.

100mm 10 Segs Klindex Metal Diamond Grinding Disc

 Metal Bond Diamond Grinding Disc with 3 holes are designed for thin mil coating removal, mastic removal,  and for the first steps in polishing.   There are 10 pieces orthogonal segments designed on the metal body.   Segment thickness:12mm   Size:4"/100mm diameter, with 3 holes.   Grit:16#-400#    We offer some bonds very soft, soft, medium, and hard, very hard bond.     Fitted to Klindex floor machine.

125mm 2 Pins Bush Hammer Plate with 3 Rollers on Werkmaster Machine

 We design this new type of bush hammer plate to fitt on Werkmaster grinding machine. Diameter:125mm  Connection Type: 2 Pins Roller No.: 3 rollers Grains of each roller:30 grains APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.