Diamond small saw blades (HN_3)
Sintered segment welding blades (HN-3) Suitable for cutting various kinds of non-metal material such as granite, marble and ceramic and concrete, highly stable and efficient. Item No Diameter Segment Dimension Teeth Inner Hole Teeth Normal core Inch mm Thickness Height Number Number HN-3 4" 105 2.0 8/10/12 8 16/20 Key/U 4.5" 115 2.2 8/10/12 9 16/20 Key/U 5" 125 2.2 8/10/12 10 16/20 Key/U 6" 150 2.2 8/10/12 11 20/22.23 Key/U 7" 180 2.4 8/10/12 12 20/22.23 Key/U 8" 200 2.4 8/10/12 13 20/22.23 Key/U 9" 230 2.6 8/10/12 16 20/22.23 Key/U 10" 150 2.6 8/10/12 18 20/22.23 Key/U
Grinding Diamond Segments for HTC Grinders
HTC grinding diamond segments are designed for thin mil coating removal, mastic removal, and for the first steps in polishing. We offer these diamonds in double bar and single bar segment design,of course can also be rounds or arrow segments . We offer three bonds soft, medium, and hard. Grinding plate fitted on HTC grinder machines. Grit:16#, 30/40#, 60/80#, 120/150#
Diamond small saw blades (HN_2)
Sintered continuous diamond saw blades(HN-2) Suitable for fabricating high precision and floopy stones, highly stable and efficiency. Item No Diameter Segment Dimension Teeth Inner Hole Teeth Normal core Inch mm Thickness Height Number Number HN-2 4" 105 2.0 8/10/12 8 16/20 Key/U 4.5" 115 2.2 8/10/12 9 16/20 Key/U 5" 125 2.2 8/10/12 10 16/20 Key/U 6" 150 2.2 8/10/12 11 20/22.23 Key/U 7" 180 2.4 8/10/12 12 20/22.23 Key/U 8" 200 2.4 8/10/12 13 20/22.23 Key/U 9" 230 2.6 8/10/12 16 20/22.23 Key/U 10" 150 2.6 8/10/12 18 20/22.23 Key/U
Snap On Diamond Grinding Segments For Scanmaskin
These kind of grinding shoes are designed for thin mil coating removal, mastic removal, and for the first steps in polishing. Snap on lock system,see below: We offer three bonds soft, medium, and hard. Grinding plate fit on Scanmaskin machine. Grit:16#, 30/40#, 60/80#, 120/150# Any other design can be made if offer us picture and specification.
Diamond small saw blades (HN_1)
Sintered continuous diamond saw blades(HN-1) Suitable for fabricating high precision and floopy stones, highly stable and efficiency. Item No Diameter Segment Dimension Teeth Inner Hole Teeth Normal core Inch mm Thickness Height Number Number HN-1 4" 105 2.0 8/10/12 8 16/20 Key/U 4.5" 115 2.2 8/10/12 9 16/20 Key/U 5" 125 2.2 8/10/12 10 16/20 Key/U 6" 150 2.2 8/10/12 11 20/22.23 Key/U 7" 180 2.4 8/10/12 12 20/22.23 Key/U 8" 200 2.4 8/10/12 13 20/22.23 Key/U 9" 230 2.6 8/10/12 16 20/22.23 Key/U 10" 150 2.6 8/10/12 18 20/22.23 Key/U
10.8 inch Bush Hammered Plate for HTC Grinders
10.8 inch Bush Hammered Plate for HTC Grinders BUSH-HAMMER is a special tool that can be easily attached to our machines to bush-hammer the floor. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing. Bush Hammered Plate with 3 Rollers Diameter:10.8"/270mm Bush Hammered Rollers:3 Rollers Grains NO.: 45 pieces Application: grinding and polishing concrete, terrazzo and other stone. Fitted to HTC 800 grinders and others' floor grinders. Sizes and connection types can be made according to clients' requirement.