6 Grinding Segments Metal Bond Cup Grinding Wheel

6 Grinding Segments Metal Bond Cup Grinding Wheelare primarily used for the grinding of hard surfaces such as concrete and stone. Additional applications for this product are the fast removal of substrates, glues and adhesives.It is an excellent quality cup wheel that performs well above it's price. Designed as an aggressive abrasive for roughing a concrete surface to improve adhesion, or for removing existing adhesive from a concrete surface. This durable wheel has a 5/8-11 arbor. Detail: 6 Grinding Segments Metal Bond Cup Grinding Wheel are constantly being developed to meet our customers’ requirements for efficient grinding tools. Murat has developed a very broad range of metal-bond diamond tools to achieve maximum capacity at minimum cost and to suit most types of floor. Floors can be divided into different categories, such as soft floors, medium-hard floors and hard floors. Grit: 30-400# Bond: Soft-medium-hard Fitted in: Grinder machine Application: for grinding concrete, hard granite, marble, engineered stone, etc Flange with thread M14 or 5/8"-11available Coarse, medium and fine grit on request

Lavina PCD Tools for Coating Removal

Lavina PCD Tools for Coating Removal Lavina PCD (Polycrystalline Diamond) tools are designed for aggressive stock and coating removal and are offered with the same QuickChange attachment as the standard metal bond QC tools. Please note that the PCD tools are directional specific and you should check the direction of rotation of the grinder heads. All Lavina machines WITH THE EXCEPTION OF PROPANE MODELS require standard right-hand rotation tools. LAVINA propane grinders require PCD tools with LEFT-hand rotation. Detail: Designed for aggressive stock and coating removal Remove Thick mastics and glues, thick parking deck membranes Remove thick elastomeric membranes, 30 mils and up epoxy coatings Directional Tool requires standard right hand rotation

Blastrac Diamond Metal Bond Grinding Disc for Floor

Blastrac Diamond Metal Bond Grinding Disc for Floor Diamond grinding consumables for soft and hard floor, available with several grit sizes The grinding discs listed on this page are designed to be used with planetary grinders in combination with Diamad adapter plates. diamond grinding wings are designed to be fitted on every Blastrac or Diamatic 3-headed planetary grinder, as well as on similar (concrete) grinders from other suppliers. Diamad discs are available in three bond, soft-medium-hard.This three bond system is specially designed to make life easier for customers. Detail: Grit: 30-400# Bond: Soft-medium-hard Fitted in: Grinder machine Application: for grinding concrete, hard granite, marble, engineered stone, etc Advantage: All Diamad discs can be mounted on our Diamad adapter plates. Each disc has 2 segments with specific “dot” design; each segment is covered with little plugs, which will attack the floor first, thus letting the diamond open much faster, for an optimized grinding efficiency. Diamad discs are delivered by sets of 9 pieces: 3 discs for each one of the 3 planetary heads.  

Tungent Carbide Alloy Diamond Bush Hammer Wheel With Support

Tungent Carbide Alloy Diamond Bush Hammer Wheel With Support Bush hammered roller is suitable for surface fabricating, making bush hammered effects for stone products. it's scrollable and highly efficent, for example, a roller of 200mm's diameter can fabricating more than 100m2 stone products per day. We can sell the roller separately, and we have plenty of styles and specifications for the roller starts form 125mm to 700mm.and the pings of roller can be customized as well. Detail: 1) suitable for surface fabricating 2) Fit to the bush hammering machine 3) put on kinds of sizes of plates to used to floor machines 4) We can sell the roller only Application 1)To create anti-slip surfaces. 2)To remove old glue and resin coatings, in particular thick resins. 3)To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4)For floor preparation before laying new coatings. 5)To expose the aggregate in concrete floors to prepare for concrete polishing.  

Innovatech Wave Segment Diamond Grinding Concrete Disc

Innovatech Wave Segment Diamond Grinding Concrete Disc Diamond grinding consumables for soft and hard floor, available with several grit sizes The grinding discs listed on this page are designed to be used with planetary grinders in combination with Diamad adapter plates. diamond grinding wings are designed to be fitted on  3-headed planetary grinder, as well as on similar (concrete) grinders from other suppliers. Diamad discs are available in three bond, soft-medium-hard.This three bond system is specially designed to make life easier for customers. Detail: Grit:6,16,30,60,80,120,150# Bond: Soft-medium-hard Fitted in:For innovatech grinding machine Application:wave segment is shaper compared with normal segment,good at grinding concrete,different hardness have different bond 4.Bond:soft bond;medium bond;hard bond or do according requires from customers. for grinding concrete, hard granite, marble, engineered stone, etc Advantages: 1)Durable metal/resin compound 2)Effective in the process of grinding and polishing concrete floor 3)Different granularities and sizes as requested 4)Competitive price and superior quality 5)Beautiful package and fast delivery 6)Excellent service  

Diamond Dust Shroud for Angle Grinder

Diamond Dust Shroud for Angle Grinder The Dust cover is the pros choice for dust control when using a hand grinder. It fits most grinders and captures up to 99% of airborne particles for outstanding dust control. It preserves air quality, protects workers from harmful silica dust, Hexavalent Chromium and silicosis with the industry's best dustless grinding system. The Dust cover installs fast and easy. Height adjustable to accommodate different cutting blades or grinding wheels. Simply loosen/tighten three spring-mounted screws. You'll like how the brush skirt promotes a smooth gliding motion for better control when grinding uneven or textured surfaces. The front lip snaps on/off with ease so you can grind up against a wall. Take the front lip off and add a cover plate and you have a dust control system for tuck pointing, decorative concrete cutting and crack chasing. Dust cleanup costs time and money and its a safety hazard. Enhance worker safety with Dust cover point-of-origin dust control systems for hand grinders. Detail 1.Vacuum shroud has been engineered to control dust during grinding operations. 2.The shroud's snail shape design utilizes the air velocity created by the rotating grinding wheel to efficiently channel dust particles away from the work surface and into the vacuum port.This technology results in less airborne dust, less cleanup and improved grinding efficiency. 3.When used with a vacuum, the shroud helps to reduce cleanup time, provide better visibility and increase productivity.This shroud is specifically designed for cleaning, leveling spots, removing epoxies, urethanes, paint and other coatings, smoothing out uneven surfaces on floors and cleaning glues and mastics after removal of floor coverings. Feature: 1.Full shroud is used for open floor grinding 2.Hinged shroud is for grinding against walls and edges 3.Developed for heavy-duty use by contractors for grinding concrete, masonry and mortar 4.Dust control reduces clean up time 5.Made from an "abrasive resistant" plastic to prevent wear from the grinding process 6.Internal steel ring built in for durability 7.Attaches to any traditional shop vacuum or commercial vacuum system 8.Easy to install, no tools are required