HOW TO CLEANING EPOXY FLOOR

Source:www.stonediamondtool.com Date:2018/4/8 Read:393

HOW TO CLEANING EPOXY FLOOR:
Using hand or mechanical scrubbing units; high-pressure water or steam equipment or mopping will usualy give very clean epoxy floors.
Epoxy floors are non-porous. They are relatively easy to clean because contaminants cannot penetrate the surface, they stay on top.
Epoxy floors will not be affected by most cleaning compounds if they are used properly and the floors rinsed thoroughly afterwards. However, as some cleaners contain chemicals which may be aggressive against low quality epoxy floors, e.g. water-based epoxy floors, (if cleaners are left on them for a longer period of time). It is advisable to perform a small cleaning test in an inconspicuous area prior to the general use of any cleaning product.
Using soft bristle scrub brushes, (either hand types or mechanical types) with appropriate cleaning compounds will be the best cleaning techniques.
After the surface has been scrubbed properly, particular attention must be paid to removing the resultant emulsion of the cleaning solution and soil. This is best achieved by thoroughly rinsing the surface with clean water and vacuuming it, or using a squeegee to remove the floor drains. It is recomended to do a second rinsing with clean water to minimize the possibility of leaving any residue.