METALLIC COATING FAQS

Source:www.stonediamondtool.com Date:2018/10/8 Read:502

Tips for using and applying metallic epoxy coatings for concrete floors By Anne Balogh, ConcreteNetwork.com

Metallic coatings may look exotic, but they are installed similarly to a typical epoxy coating or overlay, so the learning curve is relatively low. And by experimenting with different tools and application techniques, you can achieve a vast array of decorative effects. Here's what you need to know to get started.

Where can metallic coatings be used?
Metallic coatings are ideal for upscale residential or commercial applications to create a contemporary look with real wow-factor. Because of their dazzling color effects, they are often used as focal points in high-end retail stores, lobby areas, hair salons, hotels, restaurants, nightclubs, and offices.

What sort of concrete surface prep is required?
As when applying any coating, you should make sure the concrete is clean, dry, and free of grease, paint, oil, dust, curing agents, or any foreign material that will prevent proper adhesion. To aid in bonding, the concrete should also be roughened, or profiled, until it feels like 50- to 80-grit sandpaper, using methods such as grinding, shotblasting, scarifying, or water blasting. Also make sure that concrete is level, since any high or low spots will distort the final look.

Do I need to apply a primer?
With metallic coating systems, the surface should be primed with a pigmented epoxy base coat, not only to improve coating adhesion but also to provide a solid background color for the iridescent metallic pigments. On this project, for example, a black primer was applied to add depth and dimension to a blue epoxy enhanced with metallic powder. The primer color can be varied, depending on the look you’re trying to achieve.

How are metallic coatings mixed and applied?
Most metallic coatings are two-part 100%-solids epoxies, and simply require mixing Part A, Part B, and the metallic pigment. Often the pigments are sold separately so you can experiment with different color effects. Because epoxy coatings are flowable and somewhat self-leveling, you can spread them on the floor surface easily with a trowel, roller, or squeegee in a random back and forth motion. After the coating has cured, a clear topcoat may be applied, if desired, to achieve greater scuff resistance and gloss.