• Details

• How to Solve Arbor Hole Out of Round

  Source:www.stonediamondtool.com Date:2013/1/29 Read:1235

  ---

  Cause: Saw arbor badly worn due to blade being improperly mounted. Remedy: Be certain the diamond saw blade is properly mounted on the arbor before tightening the flange.

  Cause: Diamond saw blade flanges have been improperly tightened, permitting the diamond saw blade to rotate on the shaft. Remedy: Always wrench tighten the arbor nut. Never hand tighten. Always use hex nuts. Never use wing nuts.

  Cause: Diamond saw blade flanges, drive pin or the arbor shaft are won and not providing proper diamond saw blade support. Remedy: Check the blade flanges, arbor shaft and drive pin for wear, foreign matter and proper tightness. Both flanges should be no less diameter than recommended by the manufacturer. Replace worn parts.

• News Reviews

• Popular Products
  more
• • 
  • 3 Step Polishing Pad (3SP_01)
    Clicks:63072
  • 
  • CUTTING &GRINDING WHEELS (HN1
    Clicks:60418
  • 
  • RCB resin copper bond polishin
    Clicks:56481
  • 
  • 3'' Metal Resin Transitional P
    Clicks:32943
  • 
  • Fickert Diamond Brush AB05D
    Clicks:20609
  • 
  • Aluminium Backer Pad BP01
    Clicks:18560
  • 
  • Spiral yellow and green Wet Pa
    Clicks:18489
  • 
  • Diamond wet dry core drill bit
    Clicks:17568