Bush Hammered Plate with 3 Heads

This special bush hammered plates with support is very popular in Europe, West Asia and North Africa etc.. Diameter :100mm,125mm, 150mm etc. No.of Rollers: 3, 4, or according to your requirement. Roller Teeth No.:10 points/piece Rollers are made from Tungsten Carbide. Arbor: M14 thread, 5/8"-11 thread and 22,23mm APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.

Marble pad (nylon bricks)

Suitable for handy grinding machines, edge grinding machines, continuous grinding machines and handy brushes.For polishing the marble,   Specification:3",4",5",6"   Delivery Time：7-12 days

Sintered ductile iron blade

part # diameter width height bore   inch inch (mm) mm inch (mm) HPABFK230 9'' .100''(2.6) 10 7/8'' (22.2) HPABFK300 12'' .120''(3.0) 10 1'' (25.4) HPABFK350 14'' .125''(3.2) 10 1'' (25.4) Features: The combination of hundred hole core and soft bond benefit ductile iron cutting. Also used for stone cutting blade. Applications: Ductile iron and stone. Machinery: Table saw and hand held saw.  

Wet flexible polishing pads (DM03)

Wet flexible polishing pads Characteristic: used for  processing  granite,marble,glass-ceramic,artificial Stone,glazed tile, polishing tile. good softness, definition and lustousness. Delivery Time：7-12 days DM03 Grit 50# 150# 300# 500# 1000# 2000# 3000# 0#   Diameter 3" 4" 5" 80mm, 100mm,125mm

Metal Bond Grinding Pads For Concrete (DMY37)

This kind of concrete metal pad is used for first grinding of concrete after Surface preparation, for floor grinding machine. Size:4'' Grit:6-400# Velcro back. Segment No.: 12

Wet core bit (32mm)

Application: granite and marble. Segment: crown ring (dia14-dia50) and segmented (dia60-dia152). Wet use, center water feed. Total length: 50mm, 80mm, 100mm, 120mm, 360mm. Connection: shank, M14, M16, 5/8＂-11, GAS1/2＂for CNC machine. Advantage: fast and smooth cutting, long lifetime.   Specification: D(inch) D(mm) D(inch) D(mm) 3/16＂ 5mm 1-5/8＂ 42mm 1/4＂ 6mm 1-3/4＂ 45mm 5/16＂ 8mm 2＂ 50mm 3/8＂ 10mm 2-3/8＂ 60mm 1/2＂ 12mm 2-1/2＂ 63mm 5/8＂ 16mm 3＂ 76mm 3/4＂ 20mm 3-1/2＂ 89mm 1＂ 25mm 4＂ 102mm 1-3/6＂ 30mm 4-1/2＂ 115mm 1-1/4＂ 32mm 5＂ 127mm 1-3/8＂ 35mm 6＂ 152mm 1-1/2＂ 38mm