80mm Grinding Wheel With GAS 1/2 Adaptor

 Segment Height:20,30,40mm Size:3'',4'',5'' Thread: GAS 1/2'' Used on hand power tools  

Features: Flexible and unlimited to block size with long life and high efficiency in stone quarrying, block shaping, and profile processing. Applications: Marble or granite. Machinery: Wire saw machinery. Cutting method: Wet. To get more informations, please browse Contact: Mr. Hu Lei(General manager) Bead Dia. Bead No. /M . 34inch(8.5mm) 40 . 42inch(10.5mm) 40 . 44inch(11mm) 40 . 34inch(8.5mm) 33 . 42inch(10.5mm) 33

Special Bush Hammered Rollers

This special bush hammered rollers with support is very popular in Europe, West Asia and North Africa. This can be used for bush hammered plates with diameter 100mm,125mm, 150mm etc. Roller Teeth No.:10 pieces Rollers are made from Tungsten Carbide. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.

Diamond wire saw

Diamond wire saw is one of the most advanced tools widely used for quarrying and processing natural stones as well as cutting and processing concrete, asphalt and etc. Characteristics: Small cutting slot and high efficiency for quarrying. High accuracy and fine definition for processing. Convenient installation.

Husqvarna Redi Lock System Diamonds

Husqvarna grinding diamonds are used on Redi-Lock system plate. with a bar on the back 1.Two PCDs and a Bar 2. Dry grinding. For stone and concrete,terrazzo etc. 3.Grit:16-120# 4.Bond:soft bond,medium bond, hard bond

7 Inch T Segment Red Cup Wheel

The T-Seg Cup Wheel is used for thin coating removal and surface preparation. The "T" segment design provides each segment with more surface area contact and allows the operator more control with less opportunity to dig into the floor. The T-Seg provides flexibility over a wide range of surfaces without sacrificing tool life. 30/40 Grit / 12 segments / 5mm segment height Use for dry grinding Available in either 5/8” – 7/8” arbor