Diamond Tooling For HTC Floor Grinder

HTC floor grinding diamonds are designed for thin mil coating removal, mastic removal, and for the first steps in polishing. We offer these diamonds in vary segment style: three fans, double bars, single bar, rounds or arrow segments etc.    We offer three bonds soft, medium, and hard.   Grinding plate fit on HTC machine   Grit:16#, 30/40#, 60/80#, 120/150#

Diamond small saw blades (HN_6)

Diamond small saw blades (HN-6) Sintered turbo diamond saw blades Suitable for cutting various kinds of non-metal meterial such as marble,granite,and concrete,fast cutting and tossing crumbs rapidly.   Turbo dry cutting blades with protective teeth for granites Unit:mm Item No Diameter Segment Dimension Teeth Inner Hole Normal core Inch mm Thickness Height Number HN-6 4" 105 2.0 10/12 8 16/20 4.5" 115 2.2 10/12 9 16/20 5" 125 2.2 10/12 10 16/20 6" 150 2.2 10/12 11 20/22.23 7" 180 2.4 10/12 12 20/22.23 8" 200 2.4 10/12 13 20/22.23 9" 230 2.6 10/12 16 20/22.23 10" 250 2.6 10/12 18 20/22.23

PCD Grinding Segments

trapezoids are designed for thin mil coating removal, mastic removal, and for the first steps in polishing. We offer these diamonds in one bar and two PCDs We offer three bonds: soft, medium, and hard. Grinding plate fit on a lot of floor grinders. Grit:16#, 30/40#, 60/80#, 120/150# Bar size: 40x10x3mm

Heavy Duty Beveled Plugs For Concrete Grinding

This kind of plugs are used for heavy grinding and cutting before polishing or staining. The segment helps transition over joints and leave a smooth profiles. Bond: soft,medium, hard. Grit:6'',16'',30'',60'',120'',200'',300'',400''. other grits can be done according customers requirement.

Resin Copper Bond Polishing Pads

  Use for all materials: Granite/Marble Terrazzo/Concrete/Engineered Stone/Porcelain/Quartz Maximum 4000 RPM BCU resin-copper bond polishing pads, style DR. With high diamond concentration and copper inside, the BCE serial pads, never use Sic as additive, with aggressive and tenaciously, better heat transmissibility performance, can be used both by dry or by wet. They are designed for a variety of applications and can be used in the fabrication shop and at the jobsite. They are with the capability for a high glossy degree. Standard BCU pads see below. Other styles and sizes are available on customer's request.

Electroplated core bits

Application: for marble only.   Connection: 1/2" shank or other size shank sizes   Advantage: fast cutting, minimizes chipping, long life. Item no. Diameter ECB5M 5mm ECB12M 12mm ECB25M 25mm ECB32M 32mm ECB35M 35mm ECB38M 38mm ECB50M 50mm ECB64M 64mm ECB76M 76mm ECB100M 100mm ECB115M 115mm Electroplated anchor bit   Application: granite, marble.   Arbor: 3/8" or 1/4" shank,  M14 thread.   Fast cutting action, vacuum brazed for long life.   Can be made according to drawings and samples.