Special Bush Hammered Rollers

This special bush hammered rollers with support is very popular in Europe, West Asia and North Africa. This can be used for bush hammered plates with diameter 100mm,125mm, 150mm etc. Roller Teeth No.:10 pieces Rollers are made from Tungsten Carbide. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.

8 Inch Magnetic Floor Grinding Plate (No Hole)

This 8 Inch Magnetic Floor Grinding Plate has no hole .customers can drill themselves. Suit 5 grinding shoes. Can make according to customers requirement , normally 8 inch and 10 inch.  

5 Dot HTC Resin For HTC Quick Change Plate

Grit:50-3000# Use dry Specifically for polishing after metal.

Diamond Wire Saw (SW 02)

Diamond wire saw is one of the most advanced tools widely used for quarrying and processing natural stones as well as cutting and processing concrete, asphalt and etc. Characteristics: Small cutting slot and high efficiency for quarrying. High accuracy and fine definition for processing. Convenient installation.

Dry flexible polishing pads (DP05)

Dry flexible polishing pads (DP05)   characteristic: used for marble and granite processing, no need water cooling, good safety and definition. DM28-DM33 Grit 50# 60# 100# 2000# 6000# 8000# 15000# 30000# 0# Dianeter 3" 4" 5" 80mm, 100mm, 125mm

6 Segments Grinding Disc With Post For Concrete Grinding

This kind of  6 segment metal bond grinding disc is designed for quick removal of thinset, glue & mastics an ideal tool substrate preparation. Use wet or dry. Attachment system:Post Bond:hard,soft,medium Grit:16/20#,30/40#,60/80#,120/150#