Flexible Polishing Pads_Buff (BUFF_B or BUFF_W)

Flexible Polishing Pads-Buff(BUFF_B or BUFF_W) Characteristic: good definition, above 95 °C   Color: Black or White   Delivery Time：7-12 days   BUFF Diameter 80mm 100mm 125mm

Metal Bond Grinding Pads For Concrete (DMY37)

This kind of concrete metal pad is used for first grinding of concrete after Surface preparation, for floor grinding machine. Size:4'' Grit:6-400# Velcro back. Segment No.: 12

XRC High Performance Resin Polishing Rings (DMY27)

This kind of polishing rings are designed to polish edges on concrete floors after they have been grinded and honed with the 3N Copper Rings. This special bond will produce a high gloss shine on concrete. For dry applications only! Size:7'' Grit:50-3000#  

Piranha Husqvarna PCD Diamond Tools for Epoxy Removing

Piranha Husqvarna PCD Diamond Tools for Epoxy Removing For removing epoxy coating ,glue Applicaiton: Diamatic Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

Bush Hammer Plate with Lavina Traps for Coating Removing

Type:Bush Hammer Plate with Lavina Traps for Coating Removing Fitted to put on different sizes of bush hammer plates. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.

Scanmaskin diamond grinding disc

Scanmaskin diamond grinding disc Grit:16-30/40-60/80-100/120-200-400# Bond:soft,medium,hard Fitted in Scanmaskin grinder soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability. Application: Terrazzo, Concrete,Granite,and Marble,etc 1) High gloss finishes in very short time 2) Never mark the stone and burns the surface of the stone 3) Bright clear light and never fade 4) Different granularities and sizes as requested 5) Competitive price and superior quality 6) Beautiful package and fast delivery 7) Excellent service Time is money, and choosing the correct diamond tool for a job can save you a lot of time. Start by choosing a professional supplier. Then you can always get qualified help if something does not work as you expect. Remember, price and quality tend to go together. A low-cost tool of mediocre quality is rarely a good investment