Bush Hammering Plate For Klindex System

  BUSH-HAMMER is a special tool that can be easily attached to Klindex  machines to bush-hammer the floor. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.   Size:16''

Turbo Cup Grinding Wheel DGW33

1.Wet or Dry use 2.High working efficiency and using easily    . 3.Convenient installation. 4.Low-noise,no-dust,friendly surroundings,safety operation. 180mmx22.23; Coarse grit; for concrete grinding with high gloss and working efficiency

10 Seg Metal Bond Diamonds For Terrco Quick Change

The 10 Seg Disc grinding system is an innovative solution for your grinding needs. Suit Terrco Quick Change Plate. Size:3'' No.: 10 segments Grit:16#-400# Bonds:Soft, medium and hard bond.

12mm or 15mm Arrow Diamond Plug

Arrow Segmented Plugs are designed for aggressive grinding applications such as thin mil coating and mastic removal. The segmented design will provide fast production rates and leave a rough profile. We offer three bonds soft, medium, and hard.      Our Grind Plugs are available in Grit 6#, 16#, 30#, 50#, 100#, 150#, 200#   Soft Bond (Blue) – The metallic powder in the sintered segment wears away quickly releasing dull diamond crystals exposing new abrasive crystals to cut efficiently. Best used on hard surfaces.   Medium Bond (Red) – A metal bond strength right between that of soft and hard bonds.   Hard Bond (Black) – The bond of the metallic powder in the segment wears away slowly and prevents premature wear against soft, abrasive surfaces.

New Type Thicker Honeycomb Dry Polishing Pads (DMD_N1)

 Dry flexible polishing pads These honeycomb dry polishing pads are thicker than general dry polishing pads with longer life. They are polished highly gloss and shine for granite, marble and other stone. Delivery Time：7-12 days characteristic: used for marble and granite processing, no need water cooling, good safety and definition. DMD_N1 Grit 50# 100# 200# 400# 800# 1500# 3000# 0#   Diameter 3" 4" 5" 80mm, 100mm,125mm

Bush Hammer Roller

This kind of bush hammering rollers with support is very popular in Australia and USA.   APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.     Inner hole: 12mm   Outer hole:45mm   Grain No. : 45