Diamond Wire Saw (SW 02)

Diamond wire saw is one of the most advanced tools widely used for quarrying and processing natural stones as well as cutting and processing concrete, asphalt and etc. Characteristics: Small cutting slot and high efficiency for quarrying. High accuracy and fine definition for processing. Convenient installation.

Edge Polishing Pads

For polishing straight and beveled edge by or multiple head automatic edge polishing machines.Snail lock attachement. Applications:grinding,smoothing and polishing of granite,marble and other stone. Diameter:4'',5'',6'' Mesh size:50#,100#,200#,400#,800#,1500#,3000#,BUFF Advantage:faster polishing with high gloss finish in fewer passes,very long life.

3 Head Grinder Machine

3 Head Grinder Machine Technical information: Rated Voltage:110V/230V... Rated frequency:50/60HZ Rated input power:900W No load speed:900-2800RPM Max. pad diameter:4''(100mm)

3 inch copper bond diamond polishing pad

3" Copper Bond Diamond Polishing Pad Grit: 50-3000# Can be used by wet or by dry. They can be applied to excellent fabrication of marble, concrete and granite. They are perfect at polishing concrete floor by dry. Everyone who has used them likes the combination of aggressive and long lasting performance. (See the Product Number Below) HAL Hardest Epoxy Dry Use Floor Pads. This is a serial of High gloss dry pads. It is with high diamond concentration, hardest epoxy with copper oxide filler are perfect for the floor of concrete and terrazzo.  

Diamond tuck point blades for granites (TP_1)

Diamond handy cutting blades for concrete (TP-1) Nothced diamond saw blades Widely suitable for making gaps and notchs on stone or concrete long lifespan.   Diamond tuck point blades for granites Unit:mm Item No Diameter Segment Dimension Teeth Inner Hole Normal core Inch mm Thickness Height Number TP-1 4" 105 2 8/10 8 16/20 4.5" 115 2.2 8/10 9 16/20 5" 125 2.2 8/10 10 16/20 6" 150 2.2 8/10 11 20/22.23 7" 180 2.4 8/10 12 20/22.23 8" 200 2.4 8/10 13 20/22.23  

Trapezoid Metal bond PCD Pad for Diamatic Grinder

Trapezoid Metal bond PCD Pad for Diamatic Grinder For removing epoxy coating ,glue Applicaiton: Diamatic Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.