6 Inch Lichi Bush Hammer Plate for Hand Machine

6 Inch Lichi Bush Hammer Plate for Hand Machine Compared with single layer type bush hammer plate, double layers have springs between the 2 layers which works as a buffer. This design is helpful because the stone slabs not always stay level. The Bush Hammer is an ultra aggressive prep tools for use on the hand held grinder. Bush Hammer is designed to pulverize the surface of concrete making it fast and easy to get to full aggregate exposure. It is also great for coating removal. Do not apply too much pressure on bush hammer. This can prevent roller bearing from working properly and decreasing the life span of the tungsten steel. Arbor Size: 5/8"-11 or M14 Equipment: Angle grinders Grinding Method: Wet recommended

Incremental cutting finger bit tip

Incremental cutting finger bit tip designed for sink cutouts with radial arm machines such as the Fab King. These bits are long lasting and designed with speed in mind for quick sink holes on Granite and Engineered Stone. Wet use only.

180mm Ceramic Resin Ring Polishing Pads

180mm Ceramic Resin Ring Polishing Pads Ring Resin (7-inch) These flexible 7-inch Ring Resin polishing pads were specially designed for edge work and will bring out the highest luster shine. aggressively grinds through hard troweled finishes for superb results. Even inexperienced operators can grind and polish quickly without leaving gouges. Features Formulated to remove hard trowled finishes Aggressive grinding with superb results

Flat Edge Snail Lock In Line Polishing Pads

Flat Edge Snail Lock In Line Polishing Pads 5″ (125mm) C Frame, Pro Edge Snail Lock Polishing Pads Deliver Unsurpassed Polishing Results on Round and Flat Marble, Granite, Engineered and Natural Stone Edges.  Innovative Design Enables Water Flow Between Pad and Material Edge Preventing Burn Marks and Marring on Engineered Stone.  Polish Flat, Bevel, Half and Full Bullnose, Pencil Round and Common Profiles.  Utilize on Park Industries, Marmo Meccanica, Sasso Meccanica, Commanduli, Montresor, Breton & GMM Machines.

4inch Lingt triangle dry polishing pad

4inch Lingt triangle dry polishing pad Resin Dry Polishing Pads 4" are specially designed to work on dry, natural stone surfaces, especially granite and marble and cured concrete. The 50 and 100 grit polishing pads are for initial work when a larger grit size is necessary. The 200, 400, and 800 grit polishing pads are for medium buffing. The 1500 and 3000 grit polishing pads are the finest and recommended for final polishing work. The Buff pad needed for final finishing in polishing work on natural stone and cured concrete.

Lavina Scraper Carbide Holder Square Carbide Blade

  Lavina Scraper Carbide Holder  Square Carbide Blade Carbide scrapers from  quickly and easily remove thick glues, rubbery mastics and elastomeric coatings that bush hammers or metal tools can not remove effectively because they will gum up and smear. These tools won't damage the concrete underneath, and are ideal for glue removal on floors that will be polished! Left Direction Tooling for Propane and Electric Grinders Right Direction Tooling for Propane Edger and Electric Grinders only   Square carbide blade (19mm)