Diteq Diamond Grinding Shoes For Concrete Floor

Diteq Diamond Grinding Shoes For Concrete Floor 6#：Very aggressive low grit double segment used to remove shaver lines, mastic’s, thin set, or floor prep floor coating adhesion. 16#：Very aggressive medium – low grit double segment used to remove shaver lines, mastic’s, thin set, or floor prep floor coating adhesion. 30#：Aggressive medium grit double segment used for first cut   All are designed to grind and smooth bumps and rough surfaces and is built with a full 15mm segment height (One of the biggest segments in the industry), giving this tool supreme life expectancy. Green Giant Metals are very aggressive segments that easily attaches to the segment plate. These tools provide fast cutting speeds due to the highest MBS 960 XL grade synthetic diamonds. Works on all concrete grinding machines, bolt on, and magnetic plates Metal backed tooling - works great on our magnetic plates Long life expectancy and very aggressive Meets the highest expectations of smooth scratch patterns Life Expectancy: 10,000 - 12,000 Sq Ft  

Triangular Grinding Pads for Oscillating Tools

Triangular Grinding Pads for Oscillating Tools Triangular Diamond Polishing Pads can be used for wet polishing or dry polishing, are made from the finest grade diamond and resin bond matrix, and use an ultra-high quality hook and loop backing. These triangle pads allow you to polish installed stone corners where a round pad cannot access. An occasional spritz of water on the stone from a spray bottle will increase pad life, but they can be used dry as well.

BEAR CLAW PCD for Prep Master

BEAR CLAW PCD for Prep Master An unparalleled tool for epoxy and coating removal    3 x PCD Segments Wet or Dry Application (for optimum performance wet cutting is always recommended) Frequently used on Prep Master Common Applications are for Rapid Removal of Coatings, Epoxies, Paints & all Adhesives It also has 3-16 grit segments to grind away gauge marks This innovation saves time and money over traditional PCD tools Double 1/2 PCD, Heavy-Duty Coating Removal - Life Span:  10,000 to 15,000 Sq Ft.  

Single Segment Trapezoid Pads For Soft Concrete

 Single Segment Trapezoid Pads For Soft Concrete We recommend using single-segment diamond tools for the first step even with heavier machines for faster opening of the concrete. Our line of Precision Diamond Tooling features a great selection of metals, PCDs, and adapters that are compatible with all major grinder models. Metal bond diamonds are designed for aggressive coating removal, concrete grinding, and concrete polishing applications. Polycrystalline diamond tools, are used for concrete surface prep for fast coating, mastic and glue removal, and exposed aggregate. Grits：6# 、 16#、25#、30#-120# Bonds：hard、medium、soft  

Double PCD with Pad Segment compatible for Diteq

Double PCD with Pad Segment compatible for Diteq The 2 quarter round PCD is an excellent choice when removing medium/heavy coatings. The design and positioning of the PCD with an aggressive diamond segment acting as a stabilizer and depth guide scrapes the thickest of coatings aggressively and follows with a conventional grind all in one pass. These PCD's are directional specific and come in clockwise and counterclockwise orientation. PCD Tools Ideal for coating removal and preparation for epoxy. PCD’s without metal button or sacrificial bars are very aggressive and designed for thick coating removal. They will leave a very coarse profile on the concrete floor. PCD tools WITHOUT Sacrificial bars or Metal Bond Button are the most aggressive style and will leave a very coarse profile on the concrete underneath. These are suitable for removal of: Thick mastics and glues  ¼” Thick Parking Deck Membranes 30 mils and up Epoxy Coatings Thick Elastomeric Membranes Any coating with silica sand broadcast mixed in

3‘’ Bush Hammer Rollers For ASL

3‘’ Bush Hammer Rollers For ASL 45 tipped, ultra aggressive prep tools for use on walk-behind grinders. Bush hammer is designed to pulverize the surface of concrete making it fast and easy to get to full aggregate exposure. Adapter plates available for different fits of grinders, including: Bolt-on grinders including Sase, Diamatic, CPS, Klindex, Bartell Fast change grinders including Syntec converted plates Equipment: Walk-behind floor grinders Grinding Method: Wet recommended