180mm Aluminum Backer Pad with G1/2 Thread

180mm Aluminum Backer Pad with G1/2 Thread   All the backer pads are ideally suited for all kinds of machines with Arbor 5/8”-11 threaded or M14 threaded. It is available on request upon a specific drawing of customer in any diameter and height requested. Available in 3",4",5", 7''diameter.

Typhoon Type Diamond Resin Concrete Floor Polishing Pads

Typhoon Type Diamond Resin Concrete Floor Polishing Pads 1.Size available in 3'' and 4'' 2.Grit available in 30-50-100-200-400-800-1500-3000# 3..Aggressive grinding and polising for stone floors,especially work well on concrete floor 4..Both wet and dry polishing. But better polishing gloss and stone surface with water 5..Quantity discount is available  

6 Seg 7 Inch Diamond Grinding Cup Wheels

6 Seg 7 Inch Diamond Grinding Cup Wheels Cup Wheel designed for fast rough dry or water-cooling grinding  and shaping of marble and granite surfaces, cormers.edges and and angles,comes in aluminum base providing light weght and fast cooling effect by high comductivty. Features:     1). The diamond cup wheels include single row and double row       2).Applicable for fast grinding, rough deburring and smooth shaping and finishing of stones, masonry materials      3).Characterized by high working efficiency and using easily     4).It attaches to hand held grinders and floor polishing machine      Useage:      These grinding wheels are great for any type of concret constuction work .they can also be used for aggressive stock removal with granite .marble .limestone. Terrazz. Use wet or dry. Delivery Time：7-12 days Product Name  Size  Arbor Grit Turbo segment cup wheel 4''.5;;.6''.7''. M14,5/8-11 Coarse,Medium,Fine

Double PCD Single Bar Diamond Grinding Disc for Jiansong Grinder

Double PCD Single Bar Diamond Grinding Disc for Jiansong Grinder For removing epoxy coating ,glue Applicaiton: Diamatic Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

10inch Disc Metal Bond Grinding Head

10" Grinding head discs are designed to remove hard epoxies some coatings as well as grinding down rough cured concrete floors, feathering uneven joints or grinding down trip hazards.  Each plate has a universal bolt hole pattern, and will work on the majority of all grinding machines.     The 10 segment  disc provides quick removal rates with a rougher finish. The 20 segment disc provides a smoother finish. Use the Green Concrete bond for longer life in new concrete, rainouts or when grinding abrasive concrete.   Materials: Available in Cured Concrete & Green Concrete Specs Equipment: Floor Grinders that take 10" plates

10inch Bush Hammer Rollers Plate

10inch Bush Hammer Rollers Plate Diameter : 10inch/250mm Bush Hammered Rollers:3 Rollers     Grains NO.: 45 pieces   Application: grinding and polishing concrete, terrazzo and other stone. BUSH-HAMMER is a special tool that can be easily attached to our machines to bush-hammer the floor. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing. Bush Hammered Plate with 3 Rollers Sizes and connection types can be made according to clients' requirement. Materials: Available in Cured Concrete & Green Concrete Specs Equipment: Floor Grinders that take 10" plates