Scanmaskin Metal Bond Diamond Tooling

Scanmaskin Metal Bond Diamond Tooling Rough diamonds for rough grinding Use before applying any coating Color coded for easy grit recognition High-quality diamonds plus high diamond count Completely interchangeable with ALL Scan Combiflex grinders   Available grit 6#-16#-30/40#-60/80#-100/120#-150#-200#-300#-400#   Available bond soft, medium, hard

3inch Diamond Typhoon copper bond hybrid polishing pad

3" Copper Bond Diamond Polishing Pad Grit: 50-3000# Can be used by wet or by dry. They can be applied to excellent fabrication of marble, concrete and granite. They are perfect at polishing concrete floor by dry. Everyone who has used them likes the combination of aggressive and long lasting performance. (See the Product Number Below) HAL Hardest Epoxy Dry Use Floor Pads. This is a serial of High gloss dry pads. It is with high diamond concentration, hardest epoxy with copper oxide filler are perfect for the floor of concrete and terrazzo.

Split Lavina PCD Diamonds for Epoxy Floor Removing

Split Lavina PCD Diamonds for Epoxy Floor Removing is an excellent choice when removing medium/heavy coatings. The design and positioning of the PCD with an aggressive diamond segment acting as a stabilizer and depth guide scrapes the thickest of coatings aggressively and follows with a conventional grind all in one pass. These PCD's are directional specific and come in clockwise and counterclockwise orientation.  •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

3 Head Grinder Machine

3 Head Grinder Machine Technical information: Rated Voltage:110V/230V... Rated frequency:50/60HZ Rated input power:900W No load speed:900-2800RPM Max. pad diameter:4''(100mm)

Double Round Segment Diamond Grinding Disc for PHX Concrete Floor Grinder

Triple Rounds Diamond Segments for PHX Floor Grinder   These standard quality segments are a great balance between cost and performance. These segment grinding plates achieve maximum square footage at a minimal cost. Whether wet or dry, these grinding plates are effective, efficient and the product of choice. Great balance between cost and performance This grinding plate is effective, efficient and the product of choice The double rectangular segments remove adhesives, coatings and lippage Takes the floor from coarsely structured surface to pre-polish This universal tool will adapt to Husqvarna floor grinder Material Concrete Usage Wet or Dry Grit  6# 16# 30/40# 60/80# 100/120# 150# 200# 300# 400#

Bar Segments 240mm Klindex Metal Bond Diamond Grinding Ring with 3 Pins

 Metal Bond Diamond Grinding Ring with 3 Pins are designed for grinding concrete,granite, terrazzo and travertine etc. and for the first steps in grinding.   Size:240mm diameter, with 3 pins.   There are 12 pieces segments on the metal body.   Segment size:10mm height   Grit:16#-400#    We offer three bonds soft, medium, and hard; and also make very soft, very hard bond.   Fitted to Klindex floor machine.