Flat Edge Snail Lock In Line Polishing Pads

Flat Edge Snail Lock In Line Polishing Pads 5″ (125mm) C Frame, Pro Edge Snail Lock Polishing Pads Deliver Unsurpassed Polishing Results on Round and Flat Marble, Granite, Engineered and Natural Stone Edges.  Innovative Design Enables Water Flow Between Pad and Material Edge Preventing Burn Marks and Marring on Engineered Stone.  Polish Flat, Bevel, Half and Full Bullnose, Pencil Round and Common Profiles.  Utilize on Park Industries, Marmo Meccanica, Sasso Meccanica, Commanduli, Montresor, Breton & GMM Machines.

HTC Series Floor Polishing Tools Diamond Grinding Segment

HTC Series Floor Polishing Tools Diamond Grinding Segment High-concentration floor diamonds are mainly used for large machines and are not recommended for grinders smaller than 25 inches, medium floors and soft floors. The service life is 3 times that of ordinary products Round shape segments for a non gauging finish and to pack down liquid grout. Choose buttons to control the speed and aggressiveness of the cut. Single button tools are designed for lighter machines, or where aggressive stock removal is required. We recommend using single-segment diamonds for the first step even with heavier machines for faster opening of the concrete.

Diamond grinding wheel for handle angle grinder

Diamond grinding wheel for  handle angle grinder The T-Seg Cup Grinding Wheel is an agressive natured wheel that provides a fast and smooth grinding action on concrete, masonry, and stone. This T-Seg wheel leaves little to no swirl marks making it the perfect addition to any professionals kit. Field tests prove this T-SEG CUP will give longer life than comparable wheels on the market.

hand held bush hammer models

hand held bush hammer models Compared with single layer type bush hammer plate, double layers have springs between the 2 layers which works as a buffer. This design is helpful because the stone slabs not always stay level. The Bush Hammer is an ultra aggressive prep tools for use on the hand held grinder. Bush Hammer is designed to pulverize the surface of concrete making it fast and easy to get to full aggregate exposure. It is also great for coating removal. Do not apply too much pressure on bush hammer. This can prevent roller bearing from working properly and decreasing the life span of the tungsten steel. Arbor Size: 5/8"-11 Equipment: Angle grinders Grinding Method: Wet recommended

Prep Master Magnetic Fast change Adapter

Prep Master Magnetic Fast change Adapter Lippage adapter plates are designed for your concrete floor grinder. We carry a variety of adaptors to make your diamonds compatible with standard floor finishing and polishing equipment.  

BW Diamond Semgent Floor Grinding Block

BW Diamond Semgent Floor Grinding Block Application Smoothing rough surfaces or trowel marks Grinding terrazzo Repairing surface damage to concrete slabs Removing urethane or epoxy thincoats Grinding sharp aggregates such as flint and granite Removing surface imperfections from epoxy mortars Leveling high spots (maximum 1/8") Removing thin mastics and thin-set Note: If the properly installed blocks are continually being knocked out the floor is too rough or uneven and a Concrete Planer must be use first