200mm Klindex Bush Hammer Plate

200mm Klindex Bush Hammer Plate Special tool suitable for many applications: safety anti-slip surfaces on marble, granite and natural stones. Floor preparation, glue, varnish and resin coating removal To break-down thick coating difficult to remove with normal diamond tools Bush Hammer allow to get “face-see effect” “on precast panels” Scarification of any kind of surface Orange-peel skin effect on concrete and any surface

Bigger Size Triangle Electroplated Polshing Pads

 Bigger Size Triangle Electroplated Polshing Pads Width：98mm 60-120-220-400# Electroplated diamond sanding sheet for use with foam backing pad. Triangular nose for getting into corners and hard to reach areas. Hook and loop connection.

3'' Premuim Floor Pad

3'' Premuim Floor Pad Suitable for both dry and wet use.Max speed 4,000 rpm 3inch x3mm , vlecro backed for fast pad change These are for walk-behind floor grinder

Brazed Full Bullnose Router Bits

Brazed Full Bullnose Router Bits Portable router bit is a kind of diamond profiling wheel that equipped on the portable edge grinding machine.There are localization bearing and steel loop on the router bits. Due to the abstruct of steel loop, the router bits can make out the required shape along the stone edge. It is widely used in processing the edge of stone vanity top, counter top, table top etc. Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing  

Min Diamond Graver Tools

Min Diamond Graver Tools It is good for tile joint cleaning Diameter: 25-50mm Diamond Layer Thickness: 0.6mm Arbor Thickness:6.00mm Maximum Cutting Thickness: 10mm Maximum RPM: 16000 rpm

Diamond Bush Hammered Rollers fit in HTC Grinder

Diamond Bush Hammered Rollers fit in HTC Grinder Bush hammered roller is suitable for surface fabricating, making bush hammered effects for stone products. it's scrollable and highly efficent, for example, a roller of 200mm's diameter can fabricating more than 100m2 stone products per day.  We can sell the roller separately, and we have plenty of styles and the pings of roller can be customized as well. Detail:  1) suitable for surface fabricating  2) Fit to the bush hammering machine  3) put on kinds of sizes of plates to used to floor machines  4) We can sell the roller only  Application  1)To create anti-slip surfaces.  2)To remove old glue and resin coatings, in particular thick resins.  3)To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface.  4)For floor preparation before laying new coatings.  5)To expose the aggregate in concrete floors to prepare for concrete polishing.