6 segs metal diamond floor grinding pads DMY38

This kind of  6 segment metal bond grinding disc is designed for quick removal of thinset, glue & mastics an ideal tool substrate preparation. Use wet or dry. Attachment system:Velcro back or 3 thread holes, or with 1 pin/post Bond:hard,soft,medium Grit:16#-400#

Piranha Husqvarna PCD Diamond Tools for Epoxy Removing

Piranha Husqvarna PCD Diamond Tools for Epoxy Removing For removing epoxy coating ,glue Applicaiton: Diamatic Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

Electroplated core bits

Application: for marble only.   Connection: 1/2" shank or other size shank sizes   Advantage: fast cutting, minimizes chipping, long life. Item no. Diameter ECB5M 5mm ECB12M 12mm ECB25M 25mm ECB32M 32mm ECB35M 35mm ECB38M 38mm ECB50M 50mm ECB64M 64mm ECB76M 76mm ECB100M 100mm ECB115M 115mm Electroplated anchor bit   Application: granite, marble.   Arbor: 3/8" or 1/4" shank,  M14 thread.   Fast cutting action, vacuum brazed for long life.   Can be made according to drawings and samples. 

Economical Diamond Dry Polishing Pads (DMD_N2 )

Economical Diamond Dry Polishing Pads These honeycomb dry polishing pads are thicker than general dry polishing pads with cheaper price. They are polished highly gloss and shine for granite, marble and other stone. Delivery Time：7-12 days characteristic: used for marble and granite processing, no need water cooling, good safety and definition. DMD_N2 Grit 50# 100# 200# 400# 800# 1500# 3000# 0#   Diameter 3" 4" 5" 80mm, 100mm,125mm

Magnetic Diamond Grinding Segments

These kind of  grinding shoes are designed for thin mil coating removal, mastic removal, and for the first steps in polishing.   We offer these diamonds in double bar and single bar segment design,of course can also be rounds or arrow segments etc.    We offer three bonds soft, medium, and hard.   Grinding plate can be magnetic or three holes, fit on HTC ,CPS, Diamatic, Klindex etc   Grit:16#, 30/40#, 60/80#, 120/150#  

Arrow floor grinding diamond discs

This kind of  5 arrow segments metal bond grinding disc is designed for quick removal of thinset, glue & mastics an ideal tool substrate preparation. Use wet or dry. Attachment system:velcro backed or 3 thread Bond:hard,soft,medium Grit:16#-400#