Bush hammer roller with redi lock system

Type:Bush hammer roller with redi lock system Outside diameter: 45mm Inside diameter:12mmGrains No.:45 grains Fitted to put on different sizes of bush hammer plates. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.  

230mm Bush Hammer Plates for HTC Floor Grinder

230mm Bush Hammer Plates for HTC Floor Grinder   BUSH-HAMMER is a special tool that can be easily attached to floor machines to bush-hammer the floor.   APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.   230mm Bush Hammer Plates for HTC Floor Grinder Diameter: 230mm Bush Hammered Rollers:3 Rollers     Grains NO.: 45 pieces Application: grinding and polishing concrete, terrazzo and other stone. Fitted to HTC grinders and others' floor grinders. Sizes and connection types can be made according to clients' requirement.

E30 Bevel Shape Router Bits Pos 0 Segmented

Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

3'' Concrete Polishing Resin Pads (DMY24)

This type of floor polishing pad is special used for concrete, marble, granite, travrtine and other floor material polishing. Color can be choosen. With long lifetime and more aggressive removal ability. Velcro backed. for concrete floor grinding machine like Klindex and husqvarna etc. Available Size: 3" Grit: 50#  100#  200# 400# 800# 1500# 3000#

Bush Hammering Rollers With Support

 This kind of bush hammering rollers with support is very popular in Australia and USA. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing. Inner hole: 12mm   Outer hole:45mm   Grain No. : 45

4'' Dry Concrete Polishing Pad (DMY17)

Tapered Edge Concrete Resin Pads is special used for concrete, marble, granite, travrtine and other floor material polishing. Color can be choosen. With long lifetime and more aggressive removal ability. Velcro backed. for concrete floor grinding machine like Klindex and husqvarna etc. Available Size: 4" Dry use only. Grit: 50#  100#  200# 400# 800# 1500# 3000#