2 Quarter Round PCD Traps with Single Sacrificial Bar For Removing Epoxy Coating

The 2 quarter round PCD is an excellent choice when removing medium/heavy coatings. The design and positioning of the PCD with an aggressive diamond segment acting as a stabilizer and depth guide scrapes the thickest of coatings aggressively and follows with a conventional grind all in one pass. These PCD's are directional specific and come in clockwise and counterclockwise orientation.  •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

Diamond Bush Hammer Rollers/Alloy Rollers

Type:Diamond Bush Hammer Rollers/Alloy Rollers Outside diameter: 45mm Inside diameter:12mmGrains No.:45 grains Fitted to put on different sizes of bush hammer plates. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.  

Segmented Diamond Drum Wheels Finger Bits

Segmented Diamond Drum Wheels Finger Bits   Polishing Drum Wheel is designed for stock removal on granite and hard stone grinding away excess stone to prepare for polishing. Drum Wheel is used for polishing stone side after finishing Zero Tolerance Wheel . Rubber drum wheels are flexible. So they have good joint with the stone. The bond of Zero Tolerance Wheel is metal and bond of Drum Wheel is resin. Delivery Time：7-12 days Features: These resin drum wheel are prefect for working with granite or marble ,especially on kitchens.sink cutouts could be easily finished with these .

Sponge Polishing Pads for Concrete Floor

Sponge Polishing Pads for Concrete Floor   Size availabe in : 7'' 11'' 12'' 17'' Grit available in:50-100-200-400-800-1500-3000# Application:  grinder/polisher

High frequency welding marble blades

High frequency welding marble blades

7 Inch Turbo Flat Diamond Grinding Cup Wheels

7 Inch Turbo Flat Diamond Grinding Cup Wheels   Grit: coarse, medium, fine Bond: soft, medium, hard     Use for concrete grinding Available Connection: either 5/8” – 7/8” arbor M14 thread 5/8''-11 thread