Incremental cutting finger bit tip

Incremental cutting finger bit tip designed for sink cutouts with radial arm machines such as the Fab King. These bits are long lasting and designed with speed in mind for quick sink holes on Granite and Engineered Stone. Wet use only.

4inch Lingt triangle dry polishing pad

4inch Lingt triangle dry polishing pad Resin Dry Polishing Pads 4" are specially designed to work on dry, natural stone surfaces, especially granite and marble and cured concrete. The 50 and 100 grit polishing pads are for initial work when a larger grit size is necessary. The 200, 400, and 800 grit polishing pads are for medium buffing. The 1500 and 3000 grit polishing pads are the finest and recommended for final polishing work. The Buff pad needed for final finishing in polishing work on natural stone and cured concrete.

Diamond Hand Corner Pads

Diamond Hand Corner Pads Foam hand backing pad for electroplated diamond pads. Triangular nosed to get into corners and hard to reach areas.   Grits come 60-120-220-400#

Ceramic Edge Diamond Grinding Cup Wheels Discs

Ceramic Edge Diamond Grinding Cup Wheels Discs Designed to be used on an a grinder at up to 11,000 rpm at 125mm and upto 7,000rpm at 180mm. Works like a metal bond grinding cup but with more control and less scratch pattern. Ideal for edge work on large floors or for controlled exposure of aggregates on concrete casting and worktops. Grit, 30,50,100, 200 and 400. The ceramic bond enables these cups to be run at grinder speed and still retain a decent lifespan. Our ceramic grinding cup wheels are designed to replace metal grinding cups. They cut far faster than metals and leave a beautifully smooth scratch pattern for such an aggressive grinding tool. Available in grit sizes: 30, 50, 100 Sizes:  5" 125mm, 7” 180mm RPM: 1000-3000 Use: Dry or wet 5/8-11'' thread or M14 threaded tool.

4inch PREMIUM COPPER POLISHING PAD

4inch PREMIUM COPPER POLISHING PAD  Copper Bond diamond polishing pads are not simply copper flakes in the resin. These are full copper bonded diamond pads that will substantially last longer than any resin bonded diamond pads on the market. Use the Copper Bond pads to shape and start the polishing process and extend the life of the lower grit pads. Then seamlessly switch over to the standard pads at 400 and finish the polishing process.Copper Bond Hook and Loop (Hook & Loop) Diamond Polishing Pads are designed for fast stock removal on Granite, Marble, Concrete, Engineered Stone.

9Inch Wool Polishing Pads for Lavina

9" V-HARR 9Inch Wool Polishing Pads for Lavina Grit：50-100-200-400-800-1500-3000# V-Harr Discs For Polishing Concrete, Marble & Terrazzo V-Harr discs are felt-backed pads for polishing and restoring concrete, marble, and terrazzo floors. They are used on planetary floor polishers equipped with Velcro backed holding plates. The high quality felt between the resin segments works to clean the floor as well as polish the concrete to a mirror finish. Dry use is strongly recommended. However, V-Harr will produce remarkable gloss results on black granite when used wet. These discs are used for the final polishing process.