Diamond Triangular Dry Polishing Pads

Triangular dry flexible polishing pads These triangular dry polishing pads are thicker than general dry polishing pads with longer life. They are polished highly gloss and shine for granite, marble and other stone. Delivery Time：7-12 days characteristic: used for marble and granite processing, no need water cooling, good safety and definition. DMD_T Grit 50# 100# 200# 400# 800# 1500# 3000# 0#   Diameter        

Diamond electroplated flap disc

Diamond electroplated flap disc 4” 4.5” 5” 30#-600# Chiming and grinding of stone, plastic, concrete, ceramic, metal, glass, synthetic material, hard alloy, monocrystalline silicon, polycrystalline silicon etc

Trapezoid Metal bond PCD Pad for Diamatic Grinder

Trapezoid Metal bond PCD Pad for Diamatic Grinder For removing epoxy coating ,glue Applicaiton: Diamatic Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.  

Single Arrow Segment Concrete Grinding Shoes for Lavina x series

Single Arrow Segment  Concrete Grinding Shoes for Lavina x series Grit available in  :6# 16# 25# 30# 40# 70# 120# # 200# Bond available: Hard bond for soft concrete Medium bond for medium concrete Soft bond for hard concrete Extra soft bond for extra hard concrete Extra hard bond for extra soft concrete

X Series Two Button Quick Change Trap For Concrete

X-Series Two Button Quick Change Trap For Supper Hard/Medium/Soft Concrete Featuring the same QuickChange style attachment that easily slides in and out of reusable plates, with no bolting required. ** Please note X-Series Tooling can be used on X-Series and older model machines, but older model tooling cannot be used on X-Series machines.  New QuickChange Tooling with Rectangular Segments for Soft, Medium, Hard and Extra Hard Concrete are recommended for aggressive grinding and light coating removal. Available in: 400 grit 300 grit 200 grit 150 grit 120 grit 70 grit 50 grit 30 grit 16 grit 6 grit Available bond: soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability.

Diamond Grinding Block for HTC Floor Grinder

 HTC grinding diamond segments are designed for thin mil coating removal, mastic removal, and for the first steps in polishing.   We offer these diamonds in double bar and single bar segment design,of course can also be rounds or arrow segments .    We offer three bonds soft, medium, and hard.   Grinding plate fitted on HTC grinder machines.   Grit:16#, 30/40#, 60/80#, 120/150#