4 Inch Dot Type Metal Floor Polishing Pads (DMY32)

This kind of metal floor polishing pads are used on floor grinding machine. After concrete preparation , use  this kind of pads to first gringing surface ,left a smooth track. Size:4'' Dot No.: 4 Grit: 6-400#  

Stone Electroplated Wet Grinder

Stone Electroplated Wet Grinder Rated Voltage: 220V/110V Rated Frequency:50/60HZ Rated Input Power:1200W Disc Diameter:125mm NO-Load Speed :0-6000rpm Thread:M14/5/8-11'' G.W/N.W:5.1KG/4.6KG  

7 Inch Diamond PCD Cup Wheels for Epoxy Coating Removing

Segment PCD cup wheels are the best tool for removal of heavy epoxy, coatings, mastic, glues or even fast stock removal of concrete. Manufactured from the highest quality polycrystalline diamonds. This tools scraping action eliminates gumming up of segments and maximizes production. 4.5" x 12 PCD cup wheel with 7/8"- 5/8" not available with wear dots 5" x 12 PCD cup wheel with 7/8"- 5/8" available with or without wear dots 7" x 12 PCD cup wheel with 7/8"- 5/8" available with or without wear dots

New Pattern 3 Step Diamond Velcro Polishing Pads

 3-Step Dry/Wet Diamond Polishing Pads are a great advancement in the technology of diamond polishing pads. They are ideal for polishing light colored granite and marble to achieve high gloss usually acquired in 6 to 7 steps with regular 7 or 8 step diamond polishing pads.    Very cost effective 3.0 mm thickness Increase productivity by 50% or more Aggressive Achieve similar gloss as regular 7 step pads on light colored granite and marble Use Dry or Wet 4000 RPM recommended

E30 Bevel Shape Router Bits Pos 0 Segmented

Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

Bush hammer roller with redi lock system

Type:Bush hammer roller with redi lock system Outside diameter: 45mm Inside diameter:12mmGrains No.:45 grains Fitted to put on different sizes of bush hammer plates. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.