Trapezoid Type Diamond Bush Hammer Rollers for Concrete Grinding

Type:Trapezoid Type Diamond Bush Hammer Rollers for Concrete Grinding Outside diameter: 45mm Inside diameter:12mm Grains No.:45 grains Fitted to put on different sizes of bush hammer plates. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.  

Diamond Grinding Blocks _ DGB01

Diamond grinding brick adopts diamond chips as grinding granular that was sinterised with the bond made of different metal or metal compound powder by high termperature. Its structure are reasonable that the grinding granulars and the bond are combined firmly and not easy to fall off; long working life; it is applicable in various hard materils, like marble, granite and Terrazzo etc.;It improves processing precision, especially while it is applied in Continuous Automatic Granite Polishing Machine, with features of high sharpness, high Anti-abrasive and High Cost- efficiency ratio. Product Advantages:                                                                           1.Electricity saving  2.High efficiency  3.High luminosity  4. High quality 1.Ladder Shape Grinding Brick:140*(13+2) regard as 140*15 INDEX WATER GRIT NUMBER COLOR BOND TYPE LONGEVITY m2 1 lots 30/40   metal 9000-10000 2 40/50   10000-13000 3 50/60   13000-17000 4 70/80   17000-22000 5 80/100   24000-29000 6 100/120   32000-37000 7 140/200   37000-40000 8 300   Resin+Grainding granular 20000 9 400   Resin+Grainding granular 22000 10 little 500   resin 25000 11 less 800   27000 12 less 1500   30000 13 less 3000   20000 14 wet Buff   20000 15 Buff   20000 16 Buff   20000 1.Trapezia Shape Grinding Brick:135*(13+2) regard as 135*15 INDEX WATER GRIT NUMBER COLOR BOND TYPE LONGEVITY m2 1 lots 30/40   metal 8500-9500 2 40/50   9500-12500 3 50/60   12500-16500 4 70/80   16500-21500 5 80/100   23000-28000 6 100/120   31000-36000 7 140/200   36000-39000 8 300   Resin+Grainding granular 19000 9 400   Resin+Grainding granular 21000 10 little 500   resin 24000 11 less 800   26000 12 less 1500   29000 13 less 3000   19000 14 wet Buff   19000 15 Buff   19000 16 Buff   19000 1.Rectangle Shape Grinding Brick:140*(15+2) regard as 140*17 INDEX WATER GRIT NUMBER COLOR BOND TYPE LONGEVITY m2 1 lots 30/40   metal 9000-10000 2 40/50   10000-13000 3 50/60   13000-17000 4 70/80   17000-22000 5 80/100   24000-29000 6 100/120   32000-37000 7 140/200   37000-40000 8 300   Resin+Grainding granular 20000 9 400   Resin+Grainding granular 22000 10 little 500   resin 25000 11 less 800   27000 12 less 1500   30000 13 less 3000   20000 14 wet Buff   20000 15 Buff   20000 16 Buff   20000      

Laser marble blades

Laser marble blades

Diamond small saw blades (HN_1)

Sintered continuous diamond saw blades(HN-1) Suitable for fabricating high precision and floopy stones, highly stable and efficiency.     Item No Diameter Segment Dimension Teeth Inner Hole Teeth Normal core Inch mm Thickness Height Number Number HN-1   4" 105 2.0 8/10/12 8 16/20 Key/U 4.5" 115 2.2 8/10/12 9 16/20 Key/U 5" 125 2.2 8/10/12 10 16/20 Key/U 6" 150 2.2 8/10/12 11 20/22.23 Key/U 7" 180 2.4 8/10/12 12 20/22.23 Key/U 8" 200 2.4 8/10/12 13 20/22.23 Key/U 9" 230 2.6 8/10/12 16 20/22.23 Key/U 10" 150 2.6 8/10/12 18 20/22.23 Key/U

Metal Resin Bond 3 Inch Diamond Floor Polishing Pads

Metal Resin Bond 3 Inch Diamond Floor Polishing Pads 1. Extra thick segments designed for long product life. 2. 10 mm thick diamond discs are the thickest on the market. 3. Female velcro back - attaches to any male velcro face. 4. Excellent for surface polishing and floor restoration of marble, terrazzo, travertine.       3 Inch Diamond Velcro Concrete Floor Polishing Pads are a high quality long lasting resin bond diamond polishing disc used to restore and polish a variety of stone floor surfaces. It may be used under a variety of floor machines, including single disc floor machines, hand held polishers as well as multiple head machines like the Cimex. The Typhoon diamond pads perform well on a variety of hard surfaces including Marble, Terrazzo, Limestone, Travertine, leaving a flat, highly polished surface.     1. Average life of the diamond discs ranges from 3,000-5,000 sq ft. depending on floor condition, density (hardness of the stone) and lippage (unevenness of the tile). 2. Wider range of operating RPM's from 150 to 3500. 3. Higher quality diamonds with multiple edges are used. 4. Up to 3 times more diamonds per pad than competitors discs. 5. The longest lasting resin bond diamonds you can buy. Diamond discs are available in the following grits: 50#-100#-200#-400#-800#-1500#-3000#

5 Inch 125mm PCD Cup Wheels for Epoxy Floor Removing

For removing epoxy coating ,glue Applicaiton: Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.