4Inch Super Flexible Dry Polishing Pads

4Inch Super Flexible Dry Polishing Pads Grit: 50-100-200-400-800-1500-300# The resin polishing style pad has been created with a flexible back and shape to work around tighter areas, with the ability to be worked on close in along the edges on floor surfaces and around vertical surfaces, across benchtops, stairs or around pool surrounds where the area needs to be refined.  

Regular arrange cutting blades

Regular arrange cutting blades Size: 115-125-150-180-230mm Arbor: 22.23mm Designed for cutting and shaping Granite, Marble, Quartz, Reinforced Concrete, Bricks Hard Clay Roof tiles and General Masonry products. The diamond segment extends into the face of the blade to enable shaping of the work piece. This allows the blade to continue cutting and reduces the likelihood of snagging.  

White Colors Rubber Backer Pads

White Colors Rubber Backer Pads Rubber based Diameter: 100mm Arbor: M14. 5/8"-11 For velcro polishing pads It is easy for change and convenient attachment With flexible support for PSA backed sand paper  

Tungsten Carbide Tipped Scarifier Cutters for Milling Machine

Tungsten Carbide Tipped Scarifier Cutters for Milling Machine Standard carbide cutters offer extreme grinding, leveling, grooving, cleaning and general surface preparation. The standard carbide tip cutter is a very aggressive cutter designed for all heavy-duty scarifying purposes, including roughening of concrete or asphalt, trip hazard removal, cleaning of stone surfaces, concrete grooving, aggressive milling of concrete and traffic line removal. Carbide cutters last longer than standard cutters, cut down on changeover time, work best on hard surfaces, leave a slightly rough, contoured surface and fit all machines.  

100mm Thin Aluminum Backer Pads

100mm Thin Aluminum Backer Pads Size: 4 inch Arbor: 5/8"-11 Max Ratation: 13,0000rpm With flexible support for PSA backed sand paper A backer pad for engaging and supporting abrasive sheets, the backer pad being mounted securely to a drive shaft to prevent relative rotation thereto, and to allow easy mounting and dismounting of the backer pad to the mounting shaft without the use of tools. It is for contours edges and surfaces, for straight edges and surfaces.  

3'' ceramic puck with pin

3'' ceramic puck with pin It is for Diamatic Grit: 30-50-100-200-400# Excellent for removing scratches from metal steps on hard concrete and terrazzo Ceramic tools make the tricky transition between metal diamond tools and resin tools simple.In some cases,our ceramic tools can be used as the inital cut, eliminating the use of metal bond tooling saving material costs on the job. Economical and versatile