Brazed Full Bullnose Router Bits

Brazed Full Bullnose Router Bits Portable router bit is a kind of diamond profiling wheel that equipped on the portable edge grinding machine.There are localization bearing and steel loop on the router bits. Due to the abstruct of steel loop, the router bits can make out the required shape along the stone edge. It is widely used in processing the edge of stone vanity top, counter top, table top etc. Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing  

Diamond Mini Saw Blade For Stone Carving Engraving

Diamond Mini Saw Blade For Stone Carving Engraving 1. The mini stone carving engraving blade is multi-function blade that can be used for cutting engraving and carving granite marble stone concrete . 2. The 6mm shank diamond mini carving blade is made with hot pressed sintering technology that ensures the blade's good quality and long service life.   or thread type 3. Shank size: 6mm to fit most die grinders. or M14 , 5/8-11'' thread

Incremental cutting finger bit tip

Incremental cutting finger bit tip designed for sink cutouts with radial arm machines such as the Fab King. These bits are long lasting and designed with speed in mind for quick sink holes on Granite and Engineered Stone. Wet use only.

9Inch Wool Polishing Pads for Lavina

9" V-HARR 9Inch Wool Polishing Pads for Lavina Grit：50-100-200-400-800-1500-3000# V-Harr Discs For Polishing Concrete, Marble & Terrazzo V-Harr discs are felt-backed pads for polishing and restoring concrete, marble, and terrazzo floors. They are used on planetary floor polishers equipped with Velcro backed holding plates. The high quality felt between the resin segments works to clean the floor as well as polish the concrete to a mirror finish. Dry use is strongly recommended. However, V-Harr will produce remarkable gloss results on black granite when used wet. These discs are used for the final polishing process.

Flat Edge Snail Lock In Line Polishing Pads

Flat Edge Snail Lock In Line Polishing Pads 5″ (125mm) C Frame, Pro Edge Snail Lock Polishing Pads Deliver Unsurpassed Polishing Results on Round and Flat Marble, Granite, Engineered and Natural Stone Edges.  Innovative Design Enables Water Flow Between Pad and Material Edge Preventing Burn Marks and Marring on Engineered Stone.  Polish Flat, Bevel, Half and Full Bullnose, Pencil Round and Common Profiles.  Utilize on Park Industries, Marmo Meccanica, Sasso Meccanica, Commanduli, Montresor, Breton & GMM Machines.

4inch Lingt triangle dry polishing pad

4inch Lingt triangle dry polishing pad Resin Dry Polishing Pads 4" are specially designed to work on dry, natural stone surfaces, especially granite and marble and cured concrete. The 50 and 100 grit polishing pads are for initial work when a larger grit size is necessary. The 200, 400, and 800 grit polishing pads are for medium buffing. The 1500 and 3000 grit polishing pads are the finest and recommended for final polishing work. The Buff pad needed for final finishing in polishing work on natural stone and cured concrete.