Diamond cutting blade for stone

Products introduction Murat's metal-bond diamond tools are constantly being developed to meet our customers’ requirements for efficient grinding tools. Murat has developed a very broad range of metal-bond diamond tools to achieve maximum capacity at minimum cost and to suit most types of floor. Floors can be divided into different categories, such as soft floors, medium-hard floors and hard floors. Soft floors Floors of loose or porous material. A high rate of removal is achieved with these floors, but with higher tool wear. Medium-hard floors Normal building concrete. This includes marble and terrazzo floors. Hard floors Usually refers to steel trowelled floors or certain types of cement. This includes granite. The floors usually require “soft” segments.   Products describtion Diamond cutting blade for stone Fitted in: stone cutting machine Application: stone cutting

Lavina PCD Tools for Coating Removal

Lavina PCD Tools for Coating Removal Lavina PCD (Polycrystalline Diamond) tools are designed for aggressive stock and coating removal and are offered with the same QuickChange attachment as the standard metal bond QC tools. Please note that the PCD tools are directional specific and you should check the direction of rotation of the grinder heads. All Lavina machines WITH THE EXCEPTION OF PROPANE MODELS require standard right-hand rotation tools. LAVINA propane grinders require PCD tools with LEFT-hand rotation. Detail: Designed for aggressive stock and coating removal Remove Thick mastics and glues, thick parking deck membranes Remove thick elastomeric membranes, 30 mils and up epoxy coatings Directional Tool requires standard right hand rotation

Diamond Graver for stone drill

Products introduction Murat's metal-bond diamond tools are constantly being developed to meet our customers’ requirements for efficient grinding tools. Murat has developed a very broad range of metal-bond diamond tools to achieve maximum capacity at minimum cost and to suit most types of floor. Floors can be divided into different categories, such as soft floors, medium-hard floors and hard floors. Soft floors Floors of loose or porous material. A high rate of removal is achieved with these floors, but with higher tool wear. Medium-hard floors Normal building concrete. This includes marble and terrazzo floors. Hard floors Usually refers to steel trowelled floors or certain types of cement. This includes granite. The floors usually require “soft” segments.   Products describtion Diamond Graver for stone drill Seplication: 15C20/18 Fitted in: stone Grinder machine Application: stone drill

Snail buckle and M14 arbor diamond backer pads

Snail buckle and M14 arbor diamond backer pads The backer pads are Snail buckle, they accept polishing pads with Snail buckle. We have rigid backer pads made from Bakelite, Flexible backer pads made from rubber, extremely flexible backer pads made from supper quality rubber . All the backer pads are ideally suited for all kinds of machines with Arbor 5/8”-11 threaded or M14 threaded.The snail lock backers are made of aluminum and rubber which have the function of shock-proof . Detail Diameter available for 4 /5/6/7 inch The snail lock backers are also made by bakelite or rubber. One side is for snail locking and the other use M14 arbor to fit in  the back of abrasive disc  We can supply polishing pads, floor grindings, brazed pads and metal polishings for customer to adhere on the backers.

125mm Arrow segment Diamond Grinding disc with 7/8'' arbor

125mm Arrow segment Diamond Grinding disc with 7/8'' arbor Cup Wheel designed for fast rough dry or water-cooling grinding  and shaping of marble and granite surfaces, cormers.edges and and angles,comes in aluminum base providing light weght and fast cooling effect by high comductivty. Features:     1). 180mmx22.23mm hole  2).Coarse Medium Fine grit 3).Turbo segment for high grinding efficiency and using easily 4).It attaches to hand held grinders and floor polishing machine   

4 inch granite air polisher

4 inch granite air polisher Free speed: 4,500 rpm   Backing pad: 4"  Air inlet: 1/4"  Air hose: 3/8" Avg.air consumption: 16cfm Working pressure: 90psi  Feature: The water-fed installation favors your marble and stone finish work by water flow on the  working area and does no harm to your body due to non-dust atmosphere at operation. This low speed tool does the sandin and polishing work by fitting sanding disc wet 3"-4" in different grit from coarse to fine. Great for laminating marble or stone table and trim work. Side mounted water control knob and air inlet with regulating knob.