10inch Concrete Grinding Head on Edco grinder

10inch Concrete Grinding Head on Edco grinder 10" Grinding head discs are designed to remove hard epoxies some coatings as well as grinding down rough cured concrete floors, feathering uneven joints or grinding down trip hazards.  Each plate has a universal bolt hole pattern, and will work on the majority of all grinding machines.     The 10 segment  disc provides quick removal rates with a rougher finish. The 20 segment disc provides a smoother finish. Use the Green Concrete bond for longer life in new concrete, rainouts or when grinding abrasive concrete.   Materials: Available in Cured Concrete & Green Concrete Specs Equipment: Edco Floor Grinders that take 10" plates

New Type Double Wave Bars Diamond HTC EZ Change Traps for Floor Grinding

New Type Double Wave Bars Diamond HTC EZ Change Traps for Floor Grinding These standard quality segments are a great balance between cost and performance. These segment grinding plates achieve maximum square footage at a minimal cost. Whether wet or dry, these grinding plates are effective, efficient and the product of choice. Great balance between cost and performance This grinding plate is effective, efficient and the product of choice The double rectangular segments remove adhesives, coatings and lippage Takes the floor from coarsely structured surface to pre-polish This universal tool will adapt to HTC floor grinder Material Concrete Usage Wet or Dry Grit  6# 16# 30/40# 60/80# 100/120# 150# 200# 300# 400#

Segmented Diamond Drum Wheels Finger Bits

Segmented Diamond Drum Wheels Finger Bits   Polishing Drum Wheel is designed for stock removal on granite and hard stone grinding away excess stone to prepare for polishing. Drum Wheel is used for polishing stone side after finishing Zero Tolerance Wheel . Rubber drum wheels are flexible. So they have good joint with the stone. The bond of Zero Tolerance Wheel is metal and bond of Drum Wheel is resin. Delivery Time：7-12 days Features: These resin drum wheel are prefect for working with granite or marble ,especially on kitchens.sink cutouts could be easily finished with these .

3''/80mm Diamond Transitional Ceramic Pads for Floor Polishing

3''/80mm Diamond Transitional Ceramic Pads for Floor Polishing Grit: 50-100-200-400-800-1500-3000# A great choice when transitioning from traditional metals to resins. Long life! New type!

Air Angle Grinder for Stone Fabrications

Type: Air Angle Grinder for Stone Fabrications Average Air Consumption: 6 Cfm Maximum Torque: 3"/4" No-Load Speed: 4,500 rpm Air inlet: 1/4'' Air house: 3/8'' Working Pressure: 90psi Weight: 1.37kg Thread: M14 or 5/8-11 Certificate: ISO9001, SGS Delivery time: 7-12 days

Dry flexible polishing pads (DP05)

Dry flexible polishing pads (DP05)   characteristic: used for marble and granite processing, no need water cooling, good safety and definition. DM28-DM33 Grit 50# 60# 100# 2000# 6000# 8000# 15000# 30000# 0# Dianeter 3" 4" 5" 80mm, 100mm, 125mm