7 Inch Grinding Cup Wheel with 6 Arrow Segments

 The Arrow Cup Wheel is designed for aggressive grinding. The placement and orientation of the segments are designed for high stock removal.     High stock removal / Maximum tool life Size:7 inch  Grit:Coarse, medium and fine or 16#-200# for your choice. Bonds: Soft, medium and hard   6 arrow segments / 10mm segment height   Use for DRY grinding  Available in 7/8" - 5/8" arbor Other connection: M14 thread, 5/8"-11 thread  

Stone Diamond Cutting Wire (SW02)

Diamond wire saw is one of the most advanced tools widely used for quarrying and processing natural stones as well as cutting and processing concrete, asphalt and etc. Characteristics: Small cutting slot and high efficiency for quarrying. High accuracy and fine definition for processing. Convenient installation.    

2inch Terrco Machine Used Metal Plug Holder

 Size: 2 inch Used to Terrco metal diamonds to connect to Terrco floor machine;  or connect a metal velcro backing pad to put 3inch resin floor polishing pads.

Metal Grinding Diamonds with Two Pins

 Specification: 1.Grit:16#-150# 2.Soft,Medium,Hard Bond 3.Werkmaster floor system plate 4.Renovate your floor more clear

U Shaped Steel Wire Rope Brush

Diamond Abrasive Brush model:frankfurt,L140,4"-10" grit:24#-3000# long life span and grinding smoothly Manufacture

Stone Router

 It's TRUE 0-8500rpm range makes it perfect for polishing as well as cutting & grinding. Weighing only 35lbs & with a simple three prong power adapter, the Extra Sharp is very easy to use at any job site. The power of the ORIGINAL Extra Sharp STONE ROUTER will allow you to profile stone up to 3 inches thick, this capability is unrivaled in the fabrication trades