Hand Polishing Pads for Microcement

Hand Polishing Pads for Microcement Electroplated resin bonded flat diamond hand pad. Foam backed. 60 GRIT & 120 ,220,400,800,1500,3000# GRIT available. 90X55mm.

PCD Diamond Scraper for Xingyi

PCD Diamond Scraper Description PCD with Bar tooling has two offset 3/8” wide PCD diamonds with an angled Metal Bar. The Polycrystalline Diamonds (PCD) are very heat and fracture resistant, making them a great coating removal tool. Uses PCD with Bar tooling is designed with  bar to prevent the deeper scratching and gouging while still aggressively removing the coatings. It is generally the PCD of choice during prep for a final polished floor or stained and sealed floor. Application PCD with Bar tooling is the fastest way to remove coatings over 2 mils in thickness without harsh chemicals or messy shot blasting. Both PCD’s (Double and Single Bar) stand up well to high heat and are fracture resistant.

Metallic Diamond Segment Edco For Concrete

Metallic Diamond Segment Edco For Concrete 6# Extremely aggressive low grit double bar used for extensive stock and rigid thick coating removal. Also an excellent tool for prepping a floor prior to applying an epoxy. 6#：Very aggressive low grit double segment used to remove shaver lines, mastic’s, thin set, or floor prep floor coating adhesion. 16#：Very aggressive medium – low grit double segment used to remove shaver lines, mastic’s, thin set, or floor prep floor coating adhesion. 30#：Aggressive medium grit double segment used for first cut    

4 Seg Edco Block Grinding replacement part

4 Seg Edco Block Grinding replacement part Application Smoothing rough surfaces or trowel marks Grinding terrazzo Repairing surface damage to concrete slabs Removing urethane or epoxy thincoats Grinding sharp aggregates such as flint and granite Removing surface imperfections from epoxy mortars Leveling high spots (maximum 1/8") Removing thin mastics and thin-set Note: If the properly installed blocks are continually being knocked out the floor is too rough or uneven and a Concrete Planer must be use first Grits：6# 、 16#、25#、30#-120# Bonds：hard、medium、soft

3inch 5 Segment Ceramic Premium Transitional STANDARD Floor Pads

3inch 5 Segment Ceramic Premium Transitional STANDARD Floor Pads The Hybrid Diamond Resin Pie Pad are well designed to create a high quality shine on concrete floors, natural stone, granite, engineered or manufactured stone, quartz surfaces, marble, and terrazzo. Description Product Qualities - Traditional long life pattern of resin pads - Large channels for dust evacuation Materials - Concrete Floors - Natural stone - Granite - Engineered or Manufactured Stone - Quartz surfaces - Marble - Terrazzo Additional Information - Female hook & loop backing

Diteq Diamond Grinding Shoes For Concrete Floor

Diteq Diamond Grinding Shoes For Concrete Floor 6#：Very aggressive low grit double segment used to remove shaver lines, mastic’s, thin set, or floor prep floor coating adhesion. 16#：Very aggressive medium – low grit double segment used to remove shaver lines, mastic’s, thin set, or floor prep floor coating adhesion. 30#：Aggressive medium grit double segment used for first cut   All are designed to grind and smooth bumps and rough surfaces and is built with a full 15mm segment height (One of the biggest segments in the industry), giving this tool supreme life expectancy. Green Giant Metals are very aggressive segments that easily attaches to the segment plate. These tools provide fast cutting speeds due to the highest MBS 960 XL grade synthetic diamonds. Works on all concrete grinding machines, bolt on, and magnetic plates Metal backed tooling - works great on our magnetic plates Long life expectancy and very aggressive Meets the highest expectations of smooth scratch patterns Life Expectancy: 10,000 - 12,000 Sq Ft